traction control driver

Post Reply
gotslicks
Posts: 31
Joined: Wed Oct 16, 2013 8:15 am

traction control driver

Post by gotslicks »

when i try to use my traction control it says it is disabled and needs software update.
i followed all the directions and videos and still have no clue why im getting this error?
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: traction control driver

Post by Spunkster »

What Hondata system are you using this with?
gotslicks
Posts: 31
Joined: Wed Oct 16, 2013 8:15 am

Re: traction control driver

Post by gotslicks »

kpro 4 on a prb. just went and bought a new laptop to start fresh..
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: traction control driver

Post by Spunkster »

From Help, About, what version of KManager are you using?
gotslicks
Posts: 31
Joined: Wed Oct 16, 2013 8:15 am

Re: traction control driver

Post by gotslicks »

4.1.5.0 aug 17 2015
gotslicks
Posts: 31
Joined: Wed Oct 16, 2013 8:15 am

Re: traction control driver

Post by gotslicks »

just try to plug in 0n my new lap top and says same thing. software needs updated and there is no way to registar the owner.
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: traction control driver

Post by Hondata »

Can you post a screenshot of the message?
Hondata
gotslicks
Posts: 31
Joined: Wed Oct 16, 2013 8:15 am

Re: traction control driver

Post by gotslicks »

Ok
Attachments
image.jpeg
image.jpeg (2.41 MiB) Viewed 15943 times
gotslicks
Posts: 31
Joined: Wed Oct 16, 2013 8:15 am

Re: traction control driver

Post by gotslicks »

dont know if this helps but i downloaded the stand alone software and it let me register and everything seems to work?
i just wanted to see if it was the tc box. i have recently uninstalled the stand alone software.
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: traction control driver

Post by Hondata »

Please don't use the standalone software. The download page does tell you not to.
Hondata
gotslicks
Posts: 31
Joined: Wed Oct 16, 2013 8:15 am

Re: traction control driver

Post by gotslicks »

ok that fixed that issue. my next question is where do i find all the traction control pre loaded maps? when i open the folder there is nothing there?
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: traction control driver

Post by Spunkster »

Here are most of the calibrations
Attachments
FWDDrag.tcc
(1.01 KiB) Downloaded 334 times
typer 215-45-16 ecsta xs.tcc
(971 Bytes) Downloaded 350 times
2006S2000.tcc
(1.18 KiB) Downloaded 353 times
2006RSX.tcc
(1.18 KiB) Downloaded 347 times
2006civicSC.tcc
(1.17 KiB) Downloaded 318 times
2004tsx.tcc
(971 Bytes) Downloaded 357 times
2000IntegraR.tcc
(1.1 KiB) Downloaded 324 times
gotslicks
Posts: 31
Joined: Wed Oct 16, 2013 8:15 am

Re: traction control driver

Post by gotslicks »

do you still have the fwd drag cal?
also when i do a datalog in traction control window the green bar goes all the way over but when i click to read log nothing happens?
Post Reply