Knock on stock setup

FlashPro questions & answers specific to the 2010 CR-Z (US, Euro & Asia)
Post Reply
stealthtsi
Posts: 1
Joined: Wed Dec 28, 2016 9:28 am

Knock on stock setup

Post by stealthtsi »

Hi, I am experiencing knock on a stock setup. I have a sprintex supercharger I would like to install, but I need to figure out the knock issue first. Any help is greatly appreciated.
Attachments
second.fpdl
This is with the supercharger with the piggyback setup
(82.84 KiB) Downloaded 83 times
stock3.fpdl
(55 KiB) Downloaded 82 times
stock2.fpdl
(73.09 KiB) Downloaded 77 times
stock.fpdl
(37.61 KiB) Downloaded 74 times

User avatar
R-12914
Posts: 354
Joined: Sun Dec 01, 2013 12:13 pm
Location: Germany/Bavaria

Re: Knock on stock setup

Post by R-12914 »

Your engine runs very lean!
With your Piggyback, the engine runs very, very terrible!!!

Why do you use a Piggyback-ECU, if you can use the great Hondata Flashpro?

A fully retune is necessary!
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.5.8.0
Firmware: 181

Post Reply