Page 1 of 1

Subaru Impreza 560cc High Impedance Injector for CRZ

Posted: Fri Nov 25, 2016 9:20 am
by Matt Dex
Hi guys,

I am planning to go with higher boost. I did upgrade my internal with a low comp forged piston and conrod. My current 310cc K20 injector may not be able to support the higher boost. I am trying to get a set of RDX injector but my mechanic suggest me to go with the impreza injector as it is easy to get in our place. With some mod on the socket it will works.

My question is, will it work? I don't see this injector in the hondata manager injector selection. Or I can just grab any injector input with closest flow. Please help. Thank You.

Re: Subaru Impreza 560cc High Impedance Injector for CRZ

Posted: Tue Nov 29, 2016 5:38 pm
by Spunkster
You will need to know the dead times for those injectors.

Re: Subaru Impreza 560cc High Impedance Injector for CRZ

Posted: Mon Dec 05, 2016 4:30 pm
by Matt Dex
On this dead time. Do I have to do the test on the injector or i can get the figure from the factory data?

Re: Subaru Impreza 560cc High Impedance Injector for CRZ

Posted: Mon Dec 05, 2016 5:30 pm
by Spunkster
If you can find the data then use that.

Re: Subaru Impreza 560cc High Impedance Injector for CRZ

Posted: Mon Dec 19, 2016 11:23 pm
by Matt Dex
This is what i found; dead time for the injector

10V - 1.23
11V - 1.04
12V - 0.87
13V - 0.74
14V - 0.62
15V - 0.53

How should I get the injector opening time from these figure?

Re: Subaru Impreza 560cc High Impedance Injector for CRZ

Posted: Tue Dec 20, 2016 10:33 am
by Spunkster
Have you tried entering those values into the software?

Re: Subaru Impreza 560cc High Impedance Injector for CRZ

Posted: Wed Dec 21, 2016 6:11 am
by Matt Dex
Nope as i only see the table for injector opening time. Or it is the same thing?

Re: Subaru Impreza 560cc High Impedance Injector for CRZ

Posted: Wed Dec 21, 2016 11:05 am
by Spunkster
Yes it is the same thing. You may want to read through the help file at: https://www.hondata.com/help/flashpro/f ... meters.htm

Re: Subaru Impreza 560cc High Impedance Injector for CRZ

Posted: Thu Dec 22, 2016 8:46 pm
by Matt Dex
Thank You. Will try. Is it ok if i change the voltage value in the table? My current table are for 6v, 8v, 10v, 12v, 14v and 16v. But the data are from 10v to 15v. If the voltage is not a fixed value, then I will change the voltage and dead time value

Re: Subaru Impreza 560cc High Impedance Injector for CRZ

Posted: Fri Dec 23, 2016 10:32 am
by Spunkster
Yes, you will need to enter the specific data for your injectors.

Re: Subaru Impreza 560cc High Impedance Injector for CRZ

Posted: Sat Dec 24, 2016 4:53 pm
by Matt Dex
Done. Thank You. My car idling better now.