Gears not sowing properly on datalogs.
Posted: Mon Aug 04, 2014 7:41 am
Hello,
I just changed on my 2010 CRZ the final drive. ( M-Factory 4.9 )
it looks like the flash pro record wrong gear number ; something like 1, 2, 3, 3, 4, 5
and it is sometimes hesitating to register the gear, it oscillate btw two different gears while in gear.
is this something we did wrong when re-assembling sensors ?
is this problem related to the IMA not regenerating on brakes or throttle release ?
(the IMA is still regenerating on light throttle)
please note that the speed displayed on the dash is still correct. (and different from VSS of flashpro)
I know this topic has been already discussed, but i try a different angle,
I know flashpro don't touch IMA.
If you need a specific datalog to investigate my case, please ask, I will make it as you specify.
I just changed on my 2010 CRZ the final drive. ( M-Factory 4.9 )
it looks like the flash pro record wrong gear number ; something like 1, 2, 3, 3, 4, 5
and it is sometimes hesitating to register the gear, it oscillate btw two different gears while in gear.
is this something we did wrong when re-assembling sensors ?
is this problem related to the IMA not regenerating on brakes or throttle release ?
(the IMA is still regenerating on light throttle)
please note that the speed displayed on the dash is still correct. (and different from VSS of flashpro)
I know this topic has been already discussed, but i try a different angle,
I know flashpro don't touch IMA.
If you need a specific datalog to investigate my case, please ask, I will make it as you specify.