ARF WOT FOR E85 FUEL

FlashPro questions & answers specific to the 2010 CR-Z (US, Euro & Asia)
Post Reply
Kevin1166
Posts: 7
Joined: Sat Aug 12, 2017 7:30 am

ARF WOT FOR E85 FUEL

Post by Kevin1166 » Mon Aug 20, 2018 7:16 pm

Hello

Mycar is CRZ 2011 JP CVT
Currently using E85 fuel.
I have changed the injector to 310cc.
I want to know how much I should use AFR WOT ?
for E85 fuel to get the best results.

Thank You

User avatar
Spunkster
Site Admin
Posts: 16855
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: ARF WOT FOR E85 FUEL

Post by Spunkster » Tue Aug 21, 2018 5:18 pm

WOT start point on e85

if na start at 12.5afr .85lambda
if forced induction start at 11.5afr .78lamba

Kevin1166
Posts: 7
Joined: Sat Aug 12, 2017 7:30 am

Re: ARF WOT FOR E85 FUEL

Post by Kevin1166 » Tue Aug 21, 2018 10:22 pm

Spunkster wrote:
Tue Aug 21, 2018 5:18 pm
WOT start point on e85

if na start at 12.5afr .85lambda
if forced induction start at 11.5afr .78lamba
Thank you for your suggestion

How many we should increase the degree of ignition for E85 fuel.(from base map Calibration)

User avatar
Spunkster
Site Admin
Posts: 16855
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: ARF WOT FOR E85 FUEL

Post by Spunkster » Wed Aug 22, 2018 9:11 am

You should only adjust the ignition on the dyno so you can measure the power changes.

Post Reply