Where can I buy one - Portugal

FlashPro questions & answers specific to the 2010 CR-Z (US, Euro & Asia)
Post Reply
steele
Posts: 10
Joined: Wed Jun 30, 2021 3:22 am

Where can I buy one - Portugal

Post by steele »

Hi Guys I am fininding real hard to get a hold of one unit here in Portugal can you please point me in the right direction to i can buy one for my CR-Z, thank you!!!
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Where can I buy one - Portugal

Post by Spunkster »

What is your ECU part number?
steele
Posts: 10
Joined: Wed Jun 30, 2021 3:22 am

Re: Where can I buy one - Portugal

Post by steele »

I will check that today and send it here
steele
Posts: 10
Joined: Wed Jun 30, 2021 3:22 am

Re: Where can I buy one - Portugal

Post by steele »

37820-RTW-E05
6835-100528
steele
Posts: 10
Joined: Wed Jun 30, 2021 3:22 am

Re: Where can I buy one - Portugal

Post by steele »

already tried to use this page with the ECU number but the button "Check ECU" returns nothing just the EURO one the rest seems to work fine

https://www.hondata.com/flashpro/flashpro-crz-europe
steele
Posts: 10
Joined: Wed Jun 30, 2021 3:22 am

Re: Where can I buy one - Portugal

Post by steele »

It's fine by here... please where can I get it!!!
Attachments
HONDATA.jpg
HONDATA.jpg (74.13 KiB) Viewed 3629 times
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Where can I buy one - Portugal

Post by Spunkster »

You can purchase from any of our international dealers: https://www.hondata.com/international-dealers
steele
Posts: 10
Joined: Wed Jun 30, 2021 3:22 am

Re: Where can I buy one - Portugal

Post by steele »

Thank you!!
steele
Posts: 10
Joined: Wed Jun 30, 2021 3:22 am

Re: Where can I buy one - Portugal

Post by steele »

Can you just please answers a final question regarding tis unit, does it come with some maps for the car?! Or do we have to make it ourselves.
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Where can I buy one - Portugal

Post by Spunkster »

When you click on the New calibration button in the software you will see all available calibrations for it.
steele
Posts: 10
Joined: Wed Jun 30, 2021 3:22 am

Re: Where can I buy one - Portugal

Post by steele »

ahhhh ok I understand, it must work with the hondata connected right?! I have downloaded the flashpro and under new calibrations on cr-z it only appears this set.
Attachments
Untitled.jpg
Untitled.jpg (109.78 KiB) Viewed 3622 times
steele
Posts: 10
Joined: Wed Jun 30, 2021 3:22 am

Re: Where can I buy one - Portugal

Post by steele »

I believe there is nothing for the CR-Z because I installed for the FK8 and there is a bunch of calibrations :\ that was a bit disappointing
Attachments
Untitled2.jpg
Untitled2.jpg (318.8 KiB) Viewed 3622 times
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Where can I buy one - Portugal

Post by Spunkster »

There is only one calibration for your vehicle, but you can use that as a starting point to tune on the dyno.
steele
Posts: 10
Joined: Wed Jun 30, 2021 3:22 am

Re: Where can I buy one - Portugal

Post by steele »

That is so disappointing I really tough that at least came with some soft map to compare and we move on with that.... for doing that on a dyno I have specialist that will do the programming and dyno for 420€ with no need of Hondata. I really really prefer the Hondata but I am not specialist just wanted a smooth file at least..... Well thanks for answering my questions.... but 700€ without a single map it's just disappointing in my opinion. Thank you
Post Reply