Flex fuel sensor
-
- Posts: 31
- Joined: Wed Feb 19, 2020 12:42 am
Flex fuel sensor
Is it possible to wire a flex fuel sensor into a 2005 tsx running 07 ecu and flashpro?
Re: Flex fuel sensor
You need a Flex fuel sensor and controller to use it.
-
- Posts: 31
- Joined: Wed Feb 19, 2020 12:42 am
Re: Flex fuel sensor
You can use any of the inputs listed in the drop down in the Ethanol input section.
Re: Flex fuel sensor
More or less they are frequency to voltage converters with a buffered output (not duty to voltage or 'voltage converter'). It has to cope with the error frequency. If you go this route it depends on how good you are with electronics and how much time you want to spend getting it to work.
Hondata
Re: Flex fuel sensor
What's the best pin to use with A71 Ecu? 2006 TSX Manual.Hondata wrote: ↑Wed Jul 21, 2021 8:00 am More or less they are frequency to voltage converters with a buffered output (not duty to voltage or 'voltage converter'). It has to cope with the error frequency. If you go this route it depends on how good you are with electronics and how much time you want to spend getting it to work.
Re: Flex fuel sensor
You can use any of the listed inputs when you have the calibration open and look at the flex fuel options.
-
- Posts: 31
- Joined: Wed Feb 19, 2020 12:42 am
Re: Flex fuel sensor
There are 2 listed in the help file we know work: https://www.hondata.com/help/flashpro/e ... htsub=flex