MAF 2011-2014 TSX
-
- Posts: 9
- Joined: Sun Mar 25, 2018 6:17 pm
MAF 2011-2014 TSX
I would like to disable my MAF for my 2014 TSX, and use only a 2 wire IAT in my supercharger manifold in order to properly monitor IAT. I see this is an option for the 09-10, but not for the 11-14. Can we please make it happen?
Re: MAF 2011-2014 TSX
I haven't worked with any Gen 2 TSX's, but there is an option to check tuning for MAP sensor. I believe that should disable the MAF and allow you to use the IAT sensor for your application.
-
- Posts: 9
- Joined: Sun Mar 25, 2018 6:17 pm
Re: MAF 2011-2014 TSX
Said box is already checked, and the MAF still reads while plugged in. Looks like I may just have to design an IAT breakout harness, to which pins 1-3 go the the MAF, and 4-5 go to my 2 wire IAT. That is the only solution I can think of, unless Hondata is able to make this happen.
Re: MAF 2011-2014 TSX
The MAF must still be plugged in. It cannot be completely eliminated.
-
- Posts: 9
- Joined: Sun Mar 25, 2018 6:17 pm
Re: MAF 2011-2014 TSX
Looks like a custom breakout harness is in order. pins 1, 2, and 3 to the OEM MAF, and pins 4 & 5 to the relocated IAT should do the trick