Speed issues in datalog

FlashPro questions & answers specific to the 2007-2008 US TSX
Post Reply
Zoro2006
Posts: 119
Joined: Sun May 02, 2010 3:07 am

Speed issues in datalog

Post by Zoro2006 »

Seems that VSS (speed sensor) shows same value in datalogs even if I change speed in dash adjustment to 20%. Maybe it's possible to have correction in VSS sensor settings also ? Example

Image
Last edited by Zoro2006 on Tue Mar 26, 2013 1:32 pm, edited 2 times in total.
Known as Vaikis_
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Speed issues in datalog

Post by Spunkster »

This is correct as the correction factor is for the dash only and not for the ECU on a TSX.
Zoro2006
Posts: 119
Joined: Sun May 02, 2010 3:07 am

Re: Speed issues in datalog

Post by Zoro2006 »

Spunkster wrote:This is correct as the correction factor is for the dash only and not for the ECU on a TSX.
maybe it's possible to add some correction under VSS sensor that in logs we could have same speed ?
Known as Vaikis_
mabo
Posts: 64
Joined: Sun Mar 18, 2012 2:21 pm

Re: Speed issues in datalog

Post by mabo »

Since your final gear and mb other gears r different from TSX then I guess you need to use special speed corrector \ calibrator between VSS and ECU. K-tuned offers such solution.
Post Reply