Issues locking FP to 09 TSX

FlashPro questions & answers specific to the 2007-2008 US TSX
Post Reply
Jeremiah
Posts: 7
Joined: Wed Jun 20, 2012 7:29 am

Issues locking FP to 09 TSX

Post by Jeremiah » Wed Jun 20, 2012 7:35 am

I attempted to lock my FP to my CU2 6 speed TSX today, and it throws an error.

The error is: 37805-rl5-a120.

The software states that there is an unknown calibration on the ecu currently, what is the correct path to take on this? I want to make sure that everything is acceptable before I take the car to the dyno so that it is not strapped down and then the ecu is not tunable.

Thank you for any assistance.

User avatar
Spunkster
Site Admin
Posts: 17931
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Issues locking FP to 09 TSX

Post by Spunkster » Wed Jun 20, 2012 9:44 am

Please get a screenshot of the error message you are getting.

Jeremiah
Posts: 7
Joined: Wed Jun 20, 2012 7:29 am

Re: Issues locking FP to 09 TSX

Post by Jeremiah » Wed Jun 20, 2012 10:52 am

I will supply this this evening sir.

Thank you

Jeremiah
Posts: 7
Joined: Wed Jun 20, 2012 7:29 am

Re: Issues locking FP to 09 TSX

Post by Jeremiah » Mon Jun 25, 2012 4:09 pm

As requested, here is the error message.

Any suggestions are welcome.

Thank you,

Jeremiah
Attachments
error.png
Error message
error.png (25.36 KiB) Viewed 8144 times

User avatar
Spunkster
Site Admin
Posts: 17931
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Issues locking FP to 09 TSX

Post by Spunkster » Mon Jun 25, 2012 4:44 pm

With the FLashPRo plugged into the OBD2 port and the key on with the USB cable connected, go to Help in FlashProManager and click on send support informtaion. Include a description of the problem.

User avatar
Hondata
Site Admin
Posts: 8751
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Issues locking FP to 09 TSX

Post by Hondata » Tue Jun 26, 2012 8:27 am

That ECU should be supported. From help, about, what version of software are you using?
Hondata

Jeremiah
Posts: 7
Joined: Wed Jun 20, 2012 7:29 am

Re: Issues locking FP to 09 TSX

Post by Jeremiah » Tue Jun 26, 2012 3:56 pm

I uploaded the "support" information as requested, I did note my name, and that I have a forum thread, and I noted the car/tranny/year that we are talking about.

Please let me know what else I can do to assist with this.

The image below shows the version of code that my ecu has, and how it states "unknown binary"...
Attachments
error2.png
error2.png (65.57 KiB) Viewed 8133 times

Jeremiah
Posts: 7
Joined: Wed Jun 20, 2012 7:29 am

Re: Issues locking FP to 09 TSX

Post by Jeremiah » Tue Jun 26, 2012 4:42 pm

That was a fast response, and the issue was: I needed to install beta version of code for 09-10 tsx support.

It is now locked to my ecu, and I will setup a tuning appointment with the dyno shop next week. Soon we will have more than stock, stock, and supercharged maps available.

:)

Thank you,

Jeremiah

Adrian
Posts: 3
Joined: Fri Sep 14, 2012 11:24 pm

Re: Issues locking FP to 09 TSX

Post by Adrian » Fri Sep 14, 2012 11:38 pm

I also have an error trying to lock Flashpro to my 09 6mt TSX. I hope this ECU would be compatible as well.

37805-rl5-a010

Your attention to this matter is greatly appreciated.
Thank you for your time
Attachments
flashpro error msg.png
flashpro error msg.png (131.29 KiB) Viewed 7976 times

User avatar
Hondata
Site Admin
Posts: 8751
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Issues locking FP to 09 TSX

Post by Hondata » Sat Sep 15, 2012 8:54 am

It should have been supported; we'll test it next week and add it if it was not supported.
Hondata

Adrian
Posts: 3
Joined: Fri Sep 14, 2012 11:24 pm

Re: Issues locking FP to 09 TSX

Post by Adrian » Sat Sep 15, 2012 5:17 pm

Thank you.

Please let me know if there is any updates or if there is other info I can provide.

User avatar
Spunkster
Site Admin
Posts: 17931
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Issues locking FP to 09 TSX

Post by Spunkster » Tue Sep 18, 2012 3:34 pm

Here are your coices:

1) Take to an Acura dealer and see if they will upgrade the software first.
37805-RL5-A010 is the very first version of the software. Honda have updated the software since the release of the TSX to correct several problems:
Acura will install RL5-A040 which corrects the following problems: Knocking and pinging. Error codes P0339, P0302, P0303 which can happen when cranking with a low battery.
After the upgrade the FlashPro should lock and work.


2) Send ECU to us to test and upgrade.

Adrian
Posts: 3
Joined: Fri Sep 14, 2012 11:24 pm

Re: Issues locking FP to 09 TSX

Post by Adrian » Tue Sep 18, 2012 8:31 pm

I will try and get a dealer to update the ECU first.
Thank you for the prompt response.

Post Reply