FlashPro & Comptech Supercharger

FlashPro questions & answers specific to the 2007-2008 US TSX
willy18
Posts: 17
Joined: Fri Nov 11, 2011 11:05 am

FlashPro & Comptech Supercharger

Post by willy18 » Mon Jan 23, 2012 2:19 pm

Hi, I currently have an 05 auto TSX with Comptech's supercharger. I just found an 08 ECU and I'll be ordering FlashPro and the adapter kit soon. My question is, does FlashPro come with a base map equivalent to the Comptech supercharger reflash? I ask because when I switch the ECUs, I might not necessarily go to a tuner the same day, so I assume that I would need a supercharger reflash equivalent map until I get it tuned. Does that make sense?

User avatar
Spunkster
Site Admin
Posts: 17935
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: FlashPro & Comptech Supercharger

Post by Spunkster » Mon Jan 23, 2012 2:57 pm

At this time there are no other calibrations other than what is built into the software (New Calibration button).

willy18
Posts: 17
Joined: Fri Nov 11, 2011 11:05 am

Re: FlashPro & Comptech Supercharger

Post by willy18 » Mon Jan 23, 2012 3:05 pm

So does that mean I should visit a tuner as soon as possible?

Will I have any problems leaving the dealership after I've switched ECUs if I don't have a calibration meant for a supercharger?

willy18
Posts: 17
Joined: Fri Nov 11, 2011 11:05 am

Re: FlashPro & Comptech Supercharger

Post by willy18 » Mon Mar 12, 2012 4:17 pm

Hi Hondata, can you please make a map that's equivalent to your supercharger reflash for the 04 - 06 TSX? I don't want to tow my car from the dealership to the tuner but I want to make sure I don't do any damage. Also, I'm sure there are some 07/08 guys who want to start running superchagers too. Thanks.

littlebo
Posts: 30
Joined: Tue Aug 16, 2011 5:20 pm

Re: FlashPro & Comptech Supercharger

Post by littlebo » Tue Mar 13, 2012 3:26 am

willy18 wrote:Hi Hondata, can you please make a map that's equivalent to your supercharger reflash for the 04 - 06 TSX? I don't want to tow my car from the dealership to the tuner but I want to make sure I don't do any damage. Also, I'm sure there are some 07/08 guys who want to start running superchagers too. Thanks.
No go man , all you have in SC reflash is vtec lowered to 3k , everything else is drived with ACM piggyback that comes with SC. So you have to drive to the tuner on what you have ( reflash + acm ) , swap ecu there and fully tune it then with flashpro. The tool to match immo to ecu isnt that costly, Honda HIM scantool cost 140 bux . I can help you to get dealer code to do this ) Locksmithers also may have such tools, for example chineese clone fly100 can program immo even without dealer master codes , just look around maybe someone has it.

User avatar
Hondata
Site Admin
Posts: 8759
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashPro & Comptech Supercharger

Post by Hondata » Tue Mar 13, 2012 9:12 am

A Supercharger calibration for the FlashPro TSX will be available very shortly.
Hondata

willy18
Posts: 17
Joined: Fri Nov 11, 2011 11:05 am

Re: FlashPro & Comptech Supercharger

Post by willy18 » Tue Mar 13, 2012 9:18 am

^ Thank you sooo much! I can't wait to go high boost!

willy18
Posts: 17
Joined: Fri Nov 11, 2011 11:05 am

Re: FlashPro & Comptech Supercharger

Post by willy18 » Tue Mar 13, 2012 9:32 am

littlebo wrote:No go man , all you have in SC reflash is vtec lowered to 3k , everything else is drived with ACM piggyback that comes with SC. So you have to drive to the tuner on what you have ( reflash + acm ) , swap ecu there and fully tune it then with flashpro. The tool to match immo to ecu isnt that costly, Honda HIM scantool cost 140 bux . I can help you to get dealer code to do this ) Locksmithers also may have such tools, for example chineese clone fly100 can program immo even without dealer master codes , just look around maybe someone has it.
So you're saying I can buy a tool and pair the immobilizer with the new ECU without going to a dealership? If that's true, I'd definitely do that. The dealership will probably charge me the same to do it anyway.

Hondata, can you confirm if this is possible?

User avatar
Spunkster
Site Admin
Posts: 17935
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: FlashPro & Comptech Supercharger

Post by Spunkster » Tue Mar 13, 2012 9:37 am

We are not aware of any aftermarket tools that can reprogram immobilizers.

willy18
Posts: 17
Joined: Fri Nov 11, 2011 11:05 am

Re: FlashPro & Comptech Supercharger

Post by willy18 » Mon May 28, 2012 1:15 am

Hondata wrote:A Supercharger calibration for the FlashPro TSX will be available very shortly.
Any updates on this yet? Thanks.

User avatar
Hondata
Site Admin
Posts: 8759
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashPro & Comptech Supercharger

Post by Hondata » Mon May 28, 2012 8:28 am

TSX-07-7-Supercharger
Hondata

willy18
Posts: 17
Joined: Fri Nov 11, 2011 11:05 am

Re: FlashPro & Comptech Supercharger

Post by willy18 » Mon May 28, 2012 8:54 am

Is that the name of the calibration. I haven't received my FlashPro yet so I can't see what's available. Is it the same as the supercharger reflash you'd do for 04-06 TSXs? Is it calibrated for the standard I/H/HFC/E mods? Thanks.

User avatar
Hondata
Site Admin
Posts: 8759
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashPro & Comptech Supercharger

Post by Hondata » Mon May 28, 2012 10:42 am

The notes are:

Injen CAI, Hytech header and exhaust, 45degree VTC wheel, CT supercharger 3.2" pulley. CT 520cc injectors
Hondata

willy18
Posts: 17
Joined: Fri Nov 11, 2011 11:05 am

Re: FlashPro & Comptech Supercharger

Post by willy18 » Mon May 28, 2012 11:16 am

Thanks for the quick reply.

I have a question though. I don't have a 45 VTC gear, 3.2" pulley, or the CT 520cc injectors yet. I plan to get those but for now I only have the stock 3.6" pulley, CT's Ice Box, header, and exhaust, as well as a Random Tech HFC. Should I still use the supercharger calibration? What effect would that have? I thought the supercharger cal was going to be similar to s/c reflash for people who haven't gone high boost yet and haven't touched their VTC and injectors.

willy18
Posts: 17
Joined: Fri Nov 11, 2011 11:05 am

Re: FlashPro & Comptech Supercharger

Post by willy18 » Thu Jun 21, 2012 3:00 pm

Any updates to the questions in my previous post?

Also, any suggestions or where to get a 45 degree VTC?

Thanks.

Post Reply