base calibrations

FlashPro questions & answers specific to the 2007-2008 US TSX
Post Reply
xjohnkdoex
Posts: 36
Joined: Thu Jul 05, 2007 1:44 pm
Location: NY

base calibrations

Post by xjohnkdoex » Sun Dec 18, 2011 12:28 am

can the TSX-07-2-tuned calibration for the MT (injen cai, hondata IMG, 25degree vtc) be safely used for an AT?

the only base calibration for AT is the stock equivalent. i'm currently running running a CT-E intake/header, hi-flow cat, hondata IMG/P2R injector base gasket and stock exhaust.

also, thanks so for making this available to the 1G TSX.

User avatar
Hondata
Site Admin
Posts: 8758
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: base calibrations

Post by Hondata » Sun Dec 18, 2011 10:49 am

The MT and AT engines are identical, so calibrations can be switched between them.
Hondata

xjohnkdoex
Posts: 36
Joined: Thu Jul 05, 2007 1:44 pm
Location: NY

Re: base calibrations

Post by xjohnkdoex » Sun Dec 18, 2011 3:25 pm

good to know. thanks!!

lawfer23
Posts: 9
Joined: Fri Dec 23, 2011 1:57 pm

Re: base calibrations

Post by lawfer23 » Fri Dec 23, 2011 2:02 pm

dumb question but the stock equivalent option is a stock engine tuned, correct?

User avatar
Spunkster
Site Admin
Posts: 17935
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: base calibrations

Post by Spunkster » Fri Dec 23, 2011 4:08 pm

No, it is not tuned

lawfer23
Posts: 9
Joined: Fri Dec 23, 2011 1:57 pm

Re: base calibrations

Post by lawfer23 » Fri Dec 23, 2011 4:48 pm

fair enough...so as a bone stock car this doesn't help till i get an intake at least?

User avatar
Hondata
Site Admin
Posts: 8758
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: base calibrations

Post by Hondata » Fri Dec 23, 2011 11:28 pm

You can still get a fairly big improvement before and after VTEC on a stock engine, but gains are bigger with an intake.
Hondata

lawfer23
Posts: 9
Joined: Fri Dec 23, 2011 1:57 pm

Re: base calibrations

Post by lawfer23 » Fri Dec 23, 2011 11:31 pm

Fair enough, so using the tuned calibration on the list of calibrations won't hurt my unmodded engine? Sorry just trying to go about things the right way and trying to learn as well. Thanks for the quick replies!

Post Reply