Page 1 of 1
PWM Output
Posted: Thu Dec 01, 2011 9:37 pm
by dresx
I know that has at least 1 PWM out put since Flash Pro will allow me to control boost. Is there a second controllable output?
Re: PWM Output
Posted: Fri Dec 02, 2011 8:24 am
by Hondata
No, there is only 1 PWM output.
Re: PWM Output
Posted: Sat Dec 03, 2011 6:25 am
by dresx
Ouch. If I were to go to drive by cable, could I use its output as a second pwm output?
Re: PWM Output
Posted: Mon Dec 05, 2011 11:26 am
by Spunkster
No
Re: PWM Output
Posted: Wed Jan 25, 2012 1:04 am
by sass
Hondata where is the ECU pin of boost control solenoid for TSX?
http://www.hondata.com/help/flashpro/in ... meters.htm
Re: PWM Output
Posted: Wed Jan 25, 2012 9:29 am
by Hondata
Pin B16, the same as the S2000.
Re: PWM Output
Posted: Wed Jan 25, 2012 12:07 pm
by littlebo
Thanks guys, it would be nice to add this info to flashpro help , with pics .
Re: PWM Output
Posted: Wed Jan 25, 2012 12:26 pm
by Hondata
Yes, it was in the help file already, but for the next release version.
Re: PWM Output
Posted: Thu Jan 26, 2012 1:20 am
by sass
Hondata wrote:Pin B16, the same as the S2000.
Thanks
Re: PWM Output
Posted: Thu Jan 26, 2012 1:45 am
by sass
Hondata wrote:Yes, it was in the help file already, but for the next release version.
We hope to see at new version of flash manager all ours wishes.