PWM Output

FlashPro questions & answers specific to the 2007-2008 US TSX
Post Reply
dresx
Posts: 4
Joined: Wed May 11, 2011 11:09 am

PWM Output

Post by dresx »

I know that has at least 1 PWM out put since Flash Pro will allow me to control boost. Is there a second controllable output?
User avatar
Hondata
Site Admin
Posts: 10428
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: PWM Output

Post by Hondata »

No, there is only 1 PWM output.
Hondata
dresx
Posts: 4
Joined: Wed May 11, 2011 11:09 am

Re: PWM Output

Post by dresx »

Ouch. If I were to go to drive by cable, could I use its output as a second pwm output?
User avatar
Spunkster
Site Admin
Posts: 22703
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: PWM Output

Post by Spunkster »

No
sass
Posts: 110
Joined: Mon Oct 06, 2008 5:07 am
Location: Evropa-Estonia-Tallinn

Re: PWM Output

Post by sass »

Hondata where is the ECU pin of boost control solenoid for TSX?
http://www.hondata.com/help/flashpro/in ... meters.htm
Cr-v RD8+K24A2turbo+Kpro V4 prb+NPR3/6Speed+ТС+ HFS4 v3.2.
DynoWheel = 472kW / 589 N.m
HRX One Mile Challenge = Max Speed 282km
Known as Sniper
User avatar
Hondata
Site Admin
Posts: 10428
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: PWM Output

Post by Hondata »

Pin B16, the same as the S2000.
Hondata
littlebo
Posts: 30
Joined: Tue Aug 16, 2011 5:20 pm

Re: PWM Output

Post by littlebo »

Thanks guys, it would be nice to add this info to flashpro help , with pics .
User avatar
Hondata
Site Admin
Posts: 10428
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: PWM Output

Post by Hondata »

Yes, it was in the help file already, but for the next release version.
Hondata
sass
Posts: 110
Joined: Mon Oct 06, 2008 5:07 am
Location: Evropa-Estonia-Tallinn

Re: PWM Output

Post by sass »

Hondata wrote:Pin B16, the same as the S2000.
Thanks
Cr-v RD8+K24A2turbo+Kpro V4 prb+NPR3/6Speed+ТС+ HFS4 v3.2.
DynoWheel = 472kW / 589 N.m
HRX One Mile Challenge = Max Speed 282km
Known as Sniper
sass
Posts: 110
Joined: Mon Oct 06, 2008 5:07 am
Location: Evropa-Estonia-Tallinn

Re: PWM Output

Post by sass »

Hondata wrote:Yes, it was in the help file already, but for the next release version.
We hope to see at new version of flash manager all ours wishes.
Cr-v RD8+K24A2turbo+Kpro V4 prb+NPR3/6Speed+ТС+ HFS4 v3.2.
DynoWheel = 472kW / 589 N.m
HRX One Mile Challenge = Max Speed 282km
Known as Sniper
Post Reply