PWM Output

FlashPro questions & answers specific to the 2007-2008 US TSX
Post Reply
dresx
Posts: 4
Joined: Wed May 11, 2011 11:09 am

PWM Output

Post by dresx » Thu Dec 01, 2011 9:37 pm

I know that has at least 1 PWM out put since Flash Pro will allow me to control boost. Is there a second controllable output?

User avatar
Hondata
Site Admin
Posts: 8814
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: PWM Output

Post by Hondata » Fri Dec 02, 2011 8:24 am

No, there is only 1 PWM output.
Hondata

dresx
Posts: 4
Joined: Wed May 11, 2011 11:09 am

Re: PWM Output

Post by dresx » Sat Dec 03, 2011 6:25 am

Ouch. If I were to go to drive by cable, could I use its output as a second pwm output?

User avatar
Spunkster
Site Admin
Posts: 18080
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: PWM Output

Post by Spunkster » Mon Dec 05, 2011 11:26 am

No

sass
Posts: 104
Joined: Mon Oct 06, 2008 5:07 am
Location: Evropa-Estonia-Tallinn

Re: PWM Output

Post by sass » Wed Jan 25, 2012 1:04 am

Hondata where is the ECU pin of boost control solenoid for TSX?
http://www.hondata.com/help/flashpro/in ... meters.htm
Cr-v RD8+K24A2turbo+Kpro V4 prb+NPR3/6Speed+ТС+ HFS4 v3.2.
DynoWheel = 472kW / 589 N.m
HRX One Mile Challenge = Max Speed 282km
Known as Sniper

User avatar
Hondata
Site Admin
Posts: 8814
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: PWM Output

Post by Hondata » Wed Jan 25, 2012 9:29 am

Pin B16, the same as the S2000.
Hondata

littlebo
Posts: 30
Joined: Tue Aug 16, 2011 5:20 pm

Re: PWM Output

Post by littlebo » Wed Jan 25, 2012 12:07 pm

Thanks guys, it would be nice to add this info to flashpro help , with pics .

User avatar
Hondata
Site Admin
Posts: 8814
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: PWM Output

Post by Hondata » Wed Jan 25, 2012 12:26 pm

Yes, it was in the help file already, but for the next release version.
Hondata

sass
Posts: 104
Joined: Mon Oct 06, 2008 5:07 am
Location: Evropa-Estonia-Tallinn

Re: PWM Output

Post by sass » Thu Jan 26, 2012 1:20 am

Hondata wrote:Pin B16, the same as the S2000.
Thanks
Cr-v RD8+K24A2turbo+Kpro V4 prb+NPR3/6Speed+ТС+ HFS4 v3.2.
DynoWheel = 472kW / 589 N.m
HRX One Mile Challenge = Max Speed 282km
Known as Sniper

sass
Posts: 104
Joined: Mon Oct 06, 2008 5:07 am
Location: Evropa-Estonia-Tallinn

Re: PWM Output

Post by sass » Thu Jan 26, 2012 1:45 am

Hondata wrote:Yes, it was in the help file already, but for the next release version.
We hope to see at new version of flash manager all ours wishes.
Cr-v RD8+K24A2turbo+Kpro V4 prb+NPR3/6Speed+ТС+ HFS4 v3.2.
DynoWheel = 472kW / 589 N.m
HRX One Mile Challenge = Max Speed 282km
Known as Sniper

Post Reply