Need tips de-pinning CPR plug

Hondata CPR (Coil Pack Retrofit) support
Post Reply
rofeksos
Posts: 34
Joined: Mon Dec 19, 2016 1:17 pm

Need tips de-pinning CPR plug

Post by rofeksos »

I need to depin the plug that goes into the CPR module so that I can fish the wires through my firewall without cutting them all up (I want the CPR module in my car and not the engine bay). Is there a how-to somewhere on depinning them? I was able to depin my ecu side, etc but am having a hard time depinning these guys.
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Need tips de-pinning CPR plug

Post by Spunkster »

They are the same as OBD0 pins and very difficult to de-pin.
rofeksos
Posts: 34
Joined: Mon Dec 19, 2016 1:17 pm

Re: Need tips de-pinning CPR plug

Post by rofeksos »

Spunkster wrote: Tue Sep 03, 2019 12:32 pm They are the same as OBD0 pins and very difficult to de-pin.
are there any tips for me to get the cpr wiring through the firewall into the passenger footwell without cutting up the wires? The ony thing I can think of witho(ut cutting up wires) is de-pinning the injector clips and pulling them through the passenger side into the engine bay...
Post Reply