No spark help please

Hondata CPR (Coil Pack Retrofit) support
Post Reply
MrWr6ght07
Posts: 1
Joined: Sun May 27, 2018 6:01 pm

No spark help please

Post by MrWr6ght07 »

I'm not getting no spark from dizzy. I replaced CPR harness and dizzy both new different factory engine harness eg civic everything is obd1. My CPR box lights up as it should power and sync fully lit ignition flashes when turning motor over. Ecu has the q37 installed I checked and verified it. Purple altc wire to a16 Power to a25 and ground to a23 both soldered yellow and red wire to a21 I spliced in to existing wire because was unsure how to remove wire and add ICM wire. The two wires that goes to the dizzy plug on harness I soldered power wire to the black/ yellow and tach wire to the blue wire. Any help is appreciated.
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: No spark help please

Post by Spunkster »

Have you tried your CPR box in another vehicle that is running the CPR?
Post Reply