CPR help needed

Hondata CPR (Coil Pack Retrofit) support
sanman000719
Posts: 16
Joined: Sun Apr 14, 2013 2:02 pm

Re: CPR help needed

Post by sanman000719 »

well after a few weeks of tracking down issues we were down to the last option and it was the ECU the entire time.replaced it with a known good one and bammm power
sanman000719
Posts: 16
Joined: Sun Apr 14, 2013 2:02 pm

Re: CPR help needed

Post by sanman000719 »

b16a2/84.5/e85/6766/id2000/s300 with cpr and s2000 coils

Image
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: CPR help needed

Post by Spunkster »

Thanks for the feedback
rev hard
Posts: 45
Joined: Tue Nov 16, 2010 5:01 pm

Re: CPR help needed

Post by rev hard »

did the car run fine with the factory dizzy?....this sounds like the same issue i have....the ONLY thing i didnt try was another s300....hummm
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: CPR help needed

Post by Spunkster »

The s300 was not the problem it was his ECU.
sanman000719
Posts: 16
Joined: Sun Apr 14, 2013 2:02 pm

Re: CPR help needed

Post by sanman000719 »

thats correct the s300 was swapped into a different p28 and its flawless
Post Reply