can't get cpr to fire?

Hondata CPR (Coil Pack Retrofit) support
Post Reply
patroick67
Posts: 6
Joined: Tue Feb 07, 2012 11:12 pm

can't get cpr to fire?

Post by patroick67 »

Well like the title says I have a hondata cpr and I can't get it to fire, everything is hooked up as the directions tell me to, the green, red and yellow light come on like they say they should. When I pull a coil out and ground the spark plug notta I get no fire even though the box is saying it is. Coils are all brand new! it is enabled in s300 as well...I am lost?
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: can't get cpr to fire?

Post by Spunkster »

Have you followed the troubleshooting steps yet?

http://www.hondata.com/help/cpr/troubleshooting.htm
jaekgood23
Posts: 2
Joined: Sun Jul 20, 2014 8:43 pm

Re: can't get cpr to fire?

Post by jaekgood23 »

I'm having issues with getting my cpr to fire also.....I went through all the trouble shooting issues with no success....get all the correct lights just as they say I should and I tried a brand new coil pack with no success..i also tried cleaning the ground on the thermostat to make sure......pleasseeeee help!
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: can't get cpr to fire?

Post by Hondata »

Please start a new thread and follow the posting guidelines.
Hondata
Post Reply