engine cuts out at 2k rpm and 4k rpm not moving
-
- Posts: 28
- Joined: Sun Jan 15, 2012 12:09 pm
- Location: San Antonio, TX
engine cuts out at 2k rpm and 4k rpm not moving
i just got everything running in this kit a wanted to take the car for a spin. when i reach 2000 rpm the engine cuts out which i dont understand why its doing this. so i limped my car back into the garage and when parked the car will cut out at 4000 rpm. why is this happening?
Re: engine cuts out at 2k rpm and 4k rpm not moving
If you datalog are there any errors?
-
- Posts: 28
- Joined: Sun Jan 15, 2012 12:09 pm
- Location: San Antonio, TX
Re: engine cuts out at 2k rpm and 4k rpm not moving
for context
parked map is my car in the garage
1st gear is driving on the street in my neighborhood. it happens in other gears as well
parked map is my car in the garage
1st gear is driving on the street in my neighborhood. it happens in other gears as well
- Attachments
-
- e85 CPR parked.s3d
- (69.12 KiB) Downloaded 120 times
-
- e85 CPR 1st gear.s3d
- (124.88 KiB) Downloaded 130 times
Re: engine cuts out at 2k rpm and 4k rpm not moving
Your TPS does not appear to be reading at all.
-
- Posts: 28
- Joined: Sun Jan 15, 2012 12:09 pm
- Location: San Antonio, TX
Re: engine cuts out at 2k rpm and 4k rpm not moving
you was correct sir! the way i have my tps wired, for when i needed to calibrate it, the connection i had to the center wire was disconnected. plugged it back in and took my vehicle for a spin around the neighborhood. so far so good, just need to revisit the tuner to complete the tune