08 S2000 Toda Tune knocking

FlashPro questions & answers specific to the 2006-2009 (US, UK, Asia) S2000
Post Reply
hatalu
Posts: 5
Joined: Wed Apr 12, 2017 7:36 pm

08 S2000 Toda Tune knocking

Post by hatalu »

Guys, i want to know if my knock is fake or real? i read alot regarding TODA tune will knock Cylinder 2 or 3 during low RPMs which I experience in my Log. I need some advise since i'm new to flash tuning.

My current Setup:
2008 S2000 CR
Comptech Icebox intake
TODA header
70mm TP
60mm TODA dolphin dual exhaust
FD 4.77.
Attachments
datalog0006.fpdl
(2.74 MiB) Downloaded 290 times
Zperformance
Posts: 100
Joined: Thu Jul 14, 2016 12:32 pm
Location: Fresno,Ca

Re: 08 S2000 Toda Tune knocking

Post by Zperformance »

Does it show that its knocking everytime your driving and hitting that certain part of the map?
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: 08 S2000 Toda Tune knocking

Post by Hondata »

You need to reduce ignition where it is knocking - in this case, 1300 rpm @ 70 kpa.
Hondata
hatalu
Posts: 5
Joined: Wed Apr 12, 2017 7:36 pm

Re: 08 S2000 Toda Tune knocking

Post by hatalu »

Zperformance, it doesn't knock all the time, sometime it will shows up like 1 or 2 knock at cylinder 2 &3 during heavy stepping.

Hondata, how do you do it? i'm new to this, do you have screen shot or step by step process?
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: 08 S2000 Toda Tune knocking

Post by Hondata »

Look at the datalog and see what the knock count increases. You can overlay the knock count on the tables to make this easier, but the simple way is to just look at the datalog. In your case the knock count went up at 1200 rpm & 70 kPa at the 7:50 mark, and then at the 24:15 mark knock counter increased at around 1000-1300 rpm and 70 kPa.
So on the low cam ignition table reduce the ignition. I problem would reduce the six cells at 63 & 74 kPa and 900-1300 rpm by 2-3 degrees, and then blend in the changes by reducing the ignition in columns 88 kPa and up by 1-2 degrees as well.
Hondata
Post Reply