Tune requirements question

FlashPro Manager software
Post Reply
preston_781
Posts: 9
Joined: Sat Jun 26, 2021 1:10 pm

Tune requirements question

Post by preston_781 »

Hello, I am new to car tuning and modifications and I have a question about tuning. For my car, a 2014 Honda accord v6, there is a tune that requires a AEM intake, high flow cats, and a jpipe. The only issue is I have a Takeda intake instead of an AEM one. Would it be ok to download the tune onto my car even if it doesn't have that specific intake or do I need to get it professionally tuned? I don't see how there could be much of a difference between intakes but I wanted to get some other opinions before I go messing up my car.
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: Tune requirements question

Post by EFICU »

You should be fine. Just make a datalog immediately on the first drive and don't do any aggressive driving. Look over the datalog and see how it all looks and then proceed from there. If you need help with it just let me know. It should be plenty good to get you in the ballpark though, just drive nice and calm for 20 minutes to make a datalog and then look it over
Post Reply