cam command intermittent error

FlashPro Manager software
angelf1974
Posts: 62
Joined: Tue Dec 04, 2012 1:06 pm

Re: cam command intermittent error

Post by angelf1974 »

Check this. I found this problem in 2 customer´s cars

Image

Image
Honda Accord CL9 (Spain)
Undefined4door
Posts: 31
Joined: Wed Feb 19, 2020 12:42 am

Re: cam command intermittent error

Post by Undefined4door »

angelf1974 wrote: Mon May 24, 2021 10:17 am Check this. I found this problem in 2 customer´s cars

Image

Image
Interesting I took a quick glimpse at it while I had the valve cover off it looked fine i will look again though. Any chance it could be that oring on the timing cover thats causing some oil pressure issues? I installed a gauge although it fluctuates alot I'm getting anywhere between 25 to 55 psi at 3000 rpm and from 10 to 18 psi at idle
angelf1974
Posts: 62
Joined: Tue Dec 04, 2012 1:06 pm

Re: cam command intermittent error

Post by angelf1974 »

25 psi at 3000 rpm is too low
Honda Accord CL9 (Spain)
Undefined4door
Posts: 31
Joined: Wed Feb 19, 2020 12:42 am

Re: cam command intermittent error

Post by Undefined4door »

Just an update found main bearings wore down 😒 but swapped bearings out oil pressure good, looking at previous logs looks like I had some high knock counts at one point.
pablo345
Posts: 5
Joined: Tue Dec 05, 2023 8:01 am

Re: cam command intermittent error

Post by pablo345 »

IM HAVING THE SAME PROBLEM TOO REPLACED THE VTC GEAR AND VTC OIL PRESSURE ACTUATOR AND THE CODE STILL POP BACK UP RANDOMLY I HAVENT REPLACED THE VTEC SOLENOID AS YET BUT LOOKING TO DO THAT IF THATS THE PROBLEM ALSO IT WAS DOING THIS BEFORE I REPACE THE VTC GEAR AND ACTUATOR.
Post Reply