Please only reply to this thread with issues & questions specific to the changes in this release. For all other problems start a new thread under the appropriate vehicle category.
Notes
The 2018, 2019 & 2020 Euro FK8, 2018 UK and 2019 Asia FK8 'Exhaust cam (spool cold)' tables are incorrect from Honda. We have left the table as delivered by Honda since it is relatively minor but if you wish you can copy from any other FK8 calibration to fix the table.
[2017+ FK8 Civic Type R] Fixed 'new calibration' not using improved throttle selection.
Still not working for 93 octane, intercooler, impoved throttle for FK8 Americas
When a calibration is saved in the computer the DTCs are modified
[2016+ Turbo Civic / 2017+ Civic Si] Added knock sensitivity & boost by gear quick select - Please elaborate more. I see no change coming from 3.6.8 version.
[2016+ Turbo Civic / 2017+ Civic Si] Allow ignition index to be edited - Where can I see ignition index?
Report.PNG (41.38 KiB) Viewed 2795 times
Double "Improved throttle response" bug???
Improved throttle response.PNG (11.15 KiB) Viewed 2795 times
Everytime I try to update Flashpro manager on my laptop it continues to say “error downloading the update. Pease download again.” I have tried 6 times and I have tried restarting everything. No luck.
First time I tried works well I can read datalog but second time trying to read datalog again always pop out that warning. Please help. Im from Indonesia
Attachments
This note pop out
AFFIX_20210110_160859.jpg (3.05 MiB) Viewed 2770 times
Just to clarify, are you referring to "knock sensitivity low" tables for all cylinders? I can confirm that I already have this feature from version 3.6.8.
What I can't see is the "knock sensitivity quick select?" OR it is juat the same?
Here is my datalog. So the situation when opening only the datalog it self is working normal. Also when opening the calibration only it working normal. But the problem comes up when opening both, calibration and datalog.