Hello
How clud i make an custom map surcharge. On the car i changed anexhaust (80mm) full eventury instake, turbo
intercooler,radiator,thermostat and the catalis sport
I dont want a bigger soft more than 420 hp
I dont have an dyno test in Romania wich can increase power
I cant get out of the country becuase of the pandemic
What information do i need to give u to increese the power.
Thank you verry much!
increese motor power
Re: increese motor power
In any scenario you would need to wait.
1.to get out of the country to find a tuner
2. Find someone who can street tune your motor.
3 teach yourself (although this would better on a naturally aspirated motor as it is more forgiving with mistakes)
Please try not to be impatient tuning on a forced induction motor. Any mistakes can lead to catastrophic engine failure/damage.
1.to get out of the country to find a tuner
2. Find someone who can street tune your motor.
3 teach yourself (although this would better on a naturally aspirated motor as it is more forgiving with mistakes)
Please try not to be impatient tuning on a forced induction motor. Any mistakes can lead to catastrophic engine failure/damage.
Re: increese motor power
I have an honda civic type r fk2 and i own an flash pro too
I will play the map if u guys will give me one
And i can give u some recordings or anythink that u want
Thank you!
I will play the map if u guys will give me one
And i can give u some recordings or anythink that u want
Thank you!
Re: increese motor power
You would need to post up a wide open throttle from low rpm all the way to redline datalog and your current calibration.
Somebody may help you, (I would but I've never messed with k20c)
finding the right cam angles, advancing the ignition timing and adding boost would result in a power gain.
It would be wise to set up a lean cut, boost cut and have knock detection enabled.
However in my opinion stick with basemaps untill you can get access to a dyno and a reputable tuner.
Somebody may help you, (I would but I've never messed with k20c)
finding the right cam angles, advancing the ignition timing and adding boost would result in a power gain.
It would be wise to set up a lean cut, boost cut and have knock detection enabled.
However in my opinion stick with basemaps untill you can get access to a dyno and a reputable tuner.
Re: increese motor power
Thanks for the info
I made some recordings today
The car has the basic soft
Thank you!
I made some recordings today
The car has the basic soft
Thank you!
Re: increese motor power
Hello
I have on the car Eventury carbon fiber full kit, Wanger tunning downpipe 200cpi,martelius exhaust system 80mm,hf-series intercooler,turbo zentrum upgrade turbo stage 2 MHI 49477-06000,Injen tehnology hard boost pipe kit.
Im paying an new map .
And i put an attachemant with an recording
The problems starded when i put the new turbo
I have on the car Eventury carbon fiber full kit, Wanger tunning downpipe 200cpi,martelius exhaust system 80mm,hf-series intercooler,turbo zentrum upgrade turbo stage 2 MHI 49477-06000,Injen tehnology hard boost pipe kit.
Im paying an new map .
And i put an attachemant with an recording
The problems starded when i put the new turbo
- Attachments
-
- importatnt.fpdl
- recording
- (1.97 MiB) Downloaded 132 times
Re: increese motor power
This recording makes sence with the other one
Thank you!
Thank you!
- Attachments
-
- recording.fpcal
- (13.94 KiB) Downloaded 122 times