Hello , this is DV, I am Software engineer and tuner and I wanted to share some probably issues in this version
After I have updated to this version I have detected in 8 gen civic turbo some issues with ignition timing
it looks like after VTEC, ingnition timing changed automatically to 60 degree causing damage in the engine :(
please see the image below
http://prntscr.com/vsn2zx
also another issue launch, before the issue with ignition timing i have changed in the steering wheel the RPM to the launch control but i was not able to rev upper that the calibration was set
Flashpro Manager 3.6.8.0 prolly some bugs?
Re: Flashpro Manager 3.6.8.0 prolly some bugs?
Can you provide the calibration and a datalog?
The 8th gen code has not changed for some years, but we can look at this.
The 8th gen code has not changed for some years, but we can look at this.
Hondata
Re: Flashpro Manager 3.6.8.0 prolly some bugs?
I was doing some changes in fuel high, so we needed to do some pulls, i have detected that a couple minutes ago FlashproManager was closing for no reason and i had to reopen it 3-4 times FYI
I hope it can help to find the issue
Thanks a lot!
I hope it can help to find the issue
Thanks a lot!
- Attachments
-
- Datalog-201129-009.fpdl
- Datalog with the ignition timing issues
- (4.7 KiB) Downloaded 86 times
-
- 8th gen Mapa Ian.fpcal
- calibration
- (20.37 KiB) Downloaded 102 times
Re: Flashpro Manager 3.6.8.0 prolly some bugs?
Here is another Datalog a couple minutes before the issue I had yesterday
- Attachments
-
- Datalog-201129-006.fpdl
- Datalog with no ignition timing issues
- (6.25 KiB) Downloaded 101 times