FlashProManager 3.6.8

FlashPro Manager software
Locked
User avatar
Hondata
Site Admin
Posts: 10428
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

FlashProManager 3.6.8

Post by Hondata »

V3.6.8 (17 Nov 2020)
  • Firmware updated to version 191
  • [2017+ FK8 Civic Type R] Fixed 2017 JDM engine start stop warning.
  • [2016+ Turbo Civic] Fixed no start bug in Malaysian/Thai/Chinese Civic
Download here

Please only reply to this thread with issues & questions specific to the changes in this release. For all other problems start a new thread under the appropriate vehicle category.
Hondata
K24MR2
Posts: 7
Joined: Mon Jun 23, 2014 12:12 pm

Re: FlashProManager 3.6.8

Post by K24MR2 »

Hello, Flashpro Manager forced me to update to the beta version of the software. I was unable to open or edit any files until I did so. Since uploading the new firmware and reflashing, I'm having a knock sensor DTC. I've replaced the sensor, still happening. Never happened before. I'm wondering if there's some kind of glitch in this newest software. The vehicle is a 2007 RDX. Any help would be appreciated. Thanks
User avatar
Hondata
Site Admin
Posts: 10428
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashProManager 3.6.8

Post by Hondata »

We have not changed anything for the RDX and are not aware of any bugs.
Hondata
hmpg69@hotmail.com
Posts: 1
Joined: Wed Dec 30, 2020 2:46 pm

Re: FlashProManager 3.6.8

Post by hmpg69@hotmail.com »

Can you tell me why the Fk8 2017 and 2019 as factory calibration settings and the 2018 does not ,it as the 2019 factory settings,when i try to upload the base map it says´´you cannot upload a civic type r 2019 FK8 europe calibration to a civic type r 2018 europe flashpro

can you help me please,thanks in advance
User avatar
Hondata
Site Admin
Posts: 10428
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashProManager 3.6.8

Post by Hondata »

What calibration ID does your ECU have (not ECU part number)? E13 or E23?
Hondata
mfantone
Posts: 4
Joined: Fri Jan 01, 2021 11:21 am

Re: FlashProManager 3.6.8

Post by mfantone »

Curious to know if anyone else has had FPM 3.6.8 blocked from opening in Windows 10. I'm getting a Cortex XDR prevention alert and can't open the app.

Hoping someone has already encountered this and has a solution. Thanks!
User avatar
Hondata
Site Admin
Posts: 10428
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashProManager 3.6.8

Post by Hondata »

I think you realize this, but Cortex XDR is network security software. Our software runs fine on Windows 10.
Hondata
mfantone
Posts: 4
Joined: Fri Jan 01, 2021 11:21 am

Re: FlashProManager 3.6.8

Post by mfantone »

I know Hondata software runs fine on Windows 10 because I've used this previously. I was just wondering why security software would now flag FPM when it never did in the past.
mfantone
Posts: 4
Joined: Fri Jan 01, 2021 11:21 am

Re: FlashProManager 3.6.8

Post by mfantone »

Here's what I'm getting. Just need to know if there are any security issues happening. Thx.
Attachments
FPM flag.png
FPM flag.png (444.37 KiB) Viewed 1989 times
User avatar
Hondata
Site Admin
Posts: 10428
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashProManager 3.6.8

Post by Hondata »

You would have to ask Cortex XDR.

We have a digital signature on all our applications and their installers. Windows will tell you if the file has been altered before installation.
Hondata
mfantone
Posts: 4
Joined: Fri Jan 01, 2021 11:21 am

Re: FlashProManager 3.6.8

Post by mfantone »

Good to know. Thanks.
User avatar
Hondata
Site Admin
Posts: 10428
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashProManager 3.6.8

Post by Hondata »

Hondata
Locked