Changed calibration update process to be automatic if preferred (*** see note below)
Fixed datalog graph to not display unused sensors
Fixed datalog bug switching between different vehicles
[2019 CRV] Added support for 2019 CRV AWD (US & Canada) 5PA-653 and 5PA-763
[2019 CRV] Added support for 2019 CRV 2WD (Canada) 5PA-773
[2019 CRV] Added support for 2017 Indonesian 5PD-Q53, 5PD-Q73, 5PD-Q93
[2015-2017 FK2 Civic Type R] Added P0141 disable (include P2270 and P2271)
[2017+ FK8 Civic Type R] Added P04F0 to P0141 disable.
[2006-2011 US Civic Si / 2006+ S2000 / 2007-2008 TSX / 2012-2015 Civic Si] Fixed ethanol ignition compensation table index
[2016+ Turbo Civic Si] Added support for 5AM-K13 South America
[2016+ Turbo Civic] Added support for 5AG-PG1 Thailand 5AN-J62 Japan 5AF-B82 China
*** After a software update the calibration on the FlashPro and in the ECU would be out of date. Some people did not realize that you would then have to re-upload the calibration to get any changes in the new software version. Previously FlashProManager would show a message that the calibration on the FlashPro should be updated, which confused some people.
Now FlashProManager will download the calibration, update it and re-upload the calibration to the FlashPro. If the FlashPro is connected to the vehicle it will upload to the ECU if possible.
Hello! my first time on the forums so im not 100% sure on where to post this.
I have flashpro hooked up with the +3 basemap
currently im chasing a boost problem and im trying to view value for boost duty cycle.
However, when i selected that as an option to view, it shows as "sensor" with no values viewable.
Attachments
69861134_2607245206004217_5635404890906820608_n.jpg (149.22 KiB) Viewed 5718 times