Tables help

FlashPro Manager software
Post Reply
angelboyfb6
Posts: 5
Joined: Fri Mar 22, 2019 6:03 pm

Tables help

Post by angelboyfb6 »

My tables window won’t show to adjust the fuel values. I’ve downloaded the datalog but tables window still isn’t showing. Any help please? TIA
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Tables help

Post by Spunkster »

You have to open your calibration to be able to edit tables.
angelboyfb6
Posts: 5
Joined: Fri Mar 22, 2019 6:03 pm

Re: Tables help

Post by angelboyfb6 »

I opened the calibration up and downloaded the datalog as well. Still no tables window. On the tab “view” i was able to adjust values but no tables window. I opened a new calibration and attempted to open the tables on that one but still nothing. It is as if the tables window is minimized but nothing was in the background. Perhaps there is a setting where the window doesn’t pop up? I’m going to uninstall the program and redownload it again and hopefully that solves this issue. Thanks!
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Tables help

Post by Hondata »

Send a screenshot if you can.
Hondata
angelboyfb6
Posts: 5
Joined: Fri Mar 22, 2019 6:03 pm

Re: Tables help

Post by angelboyfb6 »

I uninstalled and reinstalled the hondata software and I’m now able to use the tables window. Thanks for your help. Much appreciated.
Post Reply