FlashPro Requests

FlashPro Manager software
Holly_2.0
Posts: 1
Joined: Sun Jun 28, 2020 12:23 pm

Re: FlashPro Requests

Post by Holly_2.0 »

{2018+} Honda Accord 2.0T auto 10th gen
i would like some more mod support right now there's only flex fuel. though you can install race downpipes, less restricting/bigger exhaust systems, cold air intakes, and the ctr turbo upgrade thats already discussed on your website.
Vtek
Posts: 8
Joined: Wed Jul 08, 2020 2:46 pm

Re: FlashPro Requests

Post by Vtek »

Hi i would like to buy my dad a flashpro for his 2019 cr-v 1.5t 6mt is there any chance these will be supported in the future? I have a flashpro myself for my fk8 so if i needed to pull any info from the cr-v i could use my one, thanx.
Jeremy.
User avatar
Spunkster
Site Admin
Posts: 19243
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: FlashPro Requests

Post by Spunkster »

I do not believe that there is a manual 2019 CRV.
Vtek
Posts: 8
Joined: Wed Jul 08, 2020 2:46 pm

Re: FlashPro Requests

Post by Vtek »

Yes there is a manual cr-v 6mt
Vtek
Posts: 8
Joined: Wed Jul 08, 2020 2:46 pm

Re: FlashPro Requests

Post by Vtek »

In europe its available as a cvt or 6mt, Any chance the cvt version would work on it?
arnoldod
Posts: 89
Joined: Thu Dec 26, 2019 5:25 pm

Re: FlashPro Requests

Post by arnoldod »

If possible, please add following preset for all Civic 1.5T (206+) calibrations as part of modification:
  • Preset for throttle response sensitivity ranging from normal, moderate, and high.
  • Preset for better turbo response and turbo spool ranging from stock, improve 1, & improve 2.
  • Preset for turbo boost ramp ranging from stock, improve 1, & improve 2.
Thanks!
Vtek
Posts: 8
Joined: Wed Jul 08, 2020 2:46 pm

Re: FlashPro Requests

Post by Vtek »

Spunkster wrote: Wed Jul 08, 2020 3:07 pm I do not believe that there is a manual 2019 CRV.
I suppose that means there is no calibration since you guys are unaware of its existance, is there a way of making the cvt calibration work or is there no way of upgrading the cars ecu?
sirgrumble
Posts: 3
Joined: Sat Jul 18, 2020 8:40 am

Re: FlashPro Requests

Post by sirgrumble »

As a learning experience, I want to compare different calibrations
provided with Flashpro for the Civic Type R 2017+. I would like to
do this by printing out all of the calibration values so that I can
see everything at once, and mark differences up on paper.

Is there a facility in the software that will print out the entire
contents of the calibration?

If not, is it possible to decode the fpcal files and print them out
with tooling of my own?
Vtek
Posts: 8
Joined: Wed Jul 08, 2020 2:46 pm

Re: FlashPro Requests

Post by Vtek »

Would the crv 1.5t cvt calibration work with the crv 1.5t 6mt? Or would the ecu have some of the cvt stuff conflicting with the calibration
User avatar
Spunkster
Site Admin
Posts: 19243
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: FlashPro Requests

Post by Spunkster »

This is not supported at this time.
sirgrumble
Posts: 3
Joined: Sat Jul 18, 2020 8:40 am

Re: FlashPro Requests

Post by sirgrumble »

Spunkster wrote: Mon Jul 20, 2020 11:00 am This is not supported at this time.
What is not supported?
User avatar
Spunkster
Site Admin
Posts: 19243
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: FlashPro Requests

Post by Spunkster »

Any manual transmissions CRV's
Julianobelluardo
Posts: 16
Joined: Sun May 17, 2020 6:33 am

Re: FlashPro Requests

Post by Julianobelluardo »

Instant jailbreak for 2020 FK8 !
davidato
Posts: 1
Joined: Tue Sep 01, 2020 11:50 pm

Re: FlashPro Requests

Post by davidato »

Is it possible to disable hill start assist from the ECU? I had it on my Subaru and was able to disable it. If it is possible, consider it a request from me!
myuser
Posts: 67
Joined: Sat Jun 27, 2009 6:55 am

Re: FlashPro Requests

Post by myuser »

Include the FileName uploaded in Datalog
Example: Steps...
  • File uploaded A.fpcal;
  • Save Datalog 001, 002, 003;
  • File Upload B.fpcal;
  • Save Datalog 004, 005, 006;
  • Delete All Logs
  • Save Datalog 001, 002, 003;
The datalog001 (cal A and B have the same name); Saving in FP could save the FileUploaded and/or DateUpload, to be able to know the difference between same name datalogs.

Datalog saved with Variable always incrementing.
Example: instead of datalog001, the file saved always use Internal Variable that Increments, file could be dat0003001, were 0003 is the internal variable, always incrementing.
With this way we always can see the diference between two datalogs with the same name and have a timeline.
Post Reply