FlashPro Requests
Re: FlashPro Requests
Are there any plans to add more features for the 2018+ Accord?
Specifically adding a modifications tab, more of the closed loop options that the CTR has, OBDII error test options, throttle mapping, VTC adjustment.
Specifically adding a modifications tab, more of the closed loop options that the CTR has, OBDII error test options, throttle mapping, VTC adjustment.
Re: FlashPro Requests
Fk8 Mods:
Being able to turn the car on any mode selected by user.
Being able to turn the car on any mode selected by user.
-
- Posts: 1
- Joined: Fri May 17, 2019 10:12 am
Re: FlashPro Requests
2007 FN2 Type-R GT
1. The ability to select between 2 (or more) calibrations via steering wheel buttons etc so we can switch without the hondata being plugged in I.E. Engine running!
i.e.
Economy Mode <-> Sport Mode
2. The ability to add burble (pops and bangs)
I know ECUTEC has the ability and I'm looking into switching to their method of flashing due to these two features!
1. The ability to select between 2 (or more) calibrations via steering wheel buttons etc so we can switch without the hondata being plugged in I.E. Engine running!
i.e.
Economy Mode <-> Sport Mode
2. The ability to add burble (pops and bangs)
I know ECUTEC has the ability and I'm looking into switching to their method of flashing due to these two features!
Re: FlashPro Requests
8th Gen Civic Si. With VSA (Canadian CSX) on integrated traction control options.
Re: FlashPro Requests
Hello
I have a 2018 models fk8. ECU NUMBER: 37820-5BF-G12
We have updated 3.3.8.0 but there are some problems.
I need a tuning guide of FK8 Type r (2018 models), I couldnt find definition of tables (Cam +/- , spool , vtec table , Boost PA , Boost Temp Etc.) in help document.
Secondly, when I enable live tuning in ignition tables, engine cuts at 4000 like launch control, I coluldnt figure out problem.
I have a 2018 models fk8. ECU NUMBER: 37820-5BF-G12
We have updated 3.3.8.0 but there are some problems.
I need a tuning guide of FK8 Type r (2018 models), I couldnt find definition of tables (Cam +/- , spool , vtec table , Boost PA , Boost Temp Etc.) in help document.
Secondly, when I enable live tuning in ignition tables, engine cuts at 4000 like launch control, I coluldnt figure out problem.
Re: FlashPro Requests
This is the most important "new feature" for me, and as said before in the release video for the 10th gen, it should be possible. Its just the greatest feature that could be added since flex fuel. No need to add extra hardware and knobs to have a functional performance oriented traction control. I really hope this feature will be released soon for the 8th gen Si, we all deserve this feature (not just the newer cars), we all are hondata customers.
Re: FlashPro Requests
Hi Hondata,
is it possible to make the following things on the europeane Honda Civic TypeR FN2?:
1. Is it possible to make the between gas (rev match) feature on downshift like the new Civic TypeR FK8 or the Hyundai I30N Performance:
For example:
https://www.youtube.com/watch?v=XQwvFByeuzM
2. Is it possible when starting the engine, allow a slight gas shock (automatically) or the throttle plate to open slightly for a short time (adjustable to the engine/coolant temperature).
With cold engine less, with warm engine more like the BMW M235i for example.
Thanks for Feedback!
is it possible to make the following things on the europeane Honda Civic TypeR FN2?:
1. Is it possible to make the between gas (rev match) feature on downshift like the new Civic TypeR FK8 or the Hyundai I30N Performance:
For example:
https://www.youtube.com/watch?v=XQwvFByeuzM
2. Is it possible when starting the engine, allow a slight gas shock (automatically) or the throttle plate to open slightly for a short time (adjustable to the engine/coolant temperature).
With cold engine less, with warm engine more like the BMW M235i for example.
Thanks for Feedback!
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Re: FlashPro Requests
mrgabamo wrote: ↑Sun Jun 02, 2019 10:36 amThis is the most important "new feature" for me, and as said before in the release video for the 10th gen, it should be possible. Its just the greatest feature that could be added since flex fuel. No need to add extra hardware and knobs to have a functional performance oriented traction control. I really hope this feature will be released soon for the 8th gen Si, we all deserve this feature (not just the newer cars), we all are hondata customers.
I really doubt they are going to launch this feature for 8th gens (even though i also wanted). Because Hondata already sell and sold a lot of Traction Control Units, but we can have some hope.
Re: FlashPro Requests
Please add this feature if the throttle is released (before fuel-cutoff event come in):
> Transient shift condition fueling
>> sub tables: (The amount of fuel gain applied during accelerating transient conditions (MAP Based).)
>>> Transient Fuel Gain (Accel)
>>> Transient Fuel Gain (Decel)
>> sub tables: (The length of time that the transient fuel gain is used during accel/decel conditions.)
>>> Transient Fuel Time Constant (Accel)
>>> Transient Fuel Time Constant (Decel)
Improvements/benefits:
> engine reaction time in shifiting events
> add the posibility to add the real decent i30n and focus rs/new focus/fiesta st exhaust crackle programming
> Transient shift condition fueling
>> sub tables: (The amount of fuel gain applied during accelerating transient conditions (MAP Based).)
>>> Transient Fuel Gain (Accel)
>>> Transient Fuel Gain (Decel)
>> sub tables: (The length of time that the transient fuel gain is used during accel/decel conditions.)
>>> Transient Fuel Time Constant (Accel)
>>> Transient Fuel Time Constant (Decel)
Improvements/benefits:
> engine reaction time in shifiting events
> add the posibility to add the real decent i30n and focus rs/new focus/fiesta st exhaust crackle programming
Re: FlashPro Requests
basic live tuning option in FK2 just like the FK8 optins. Thanks.
Re: FlashPro Requests
2017 Honda Civic Hatchback Sport CVT here
Ability to have the car start with the VSA button already disabled. I know the Type Rs have this ability but I cannot find anywhere in the manual that allows the lesser models to do the same. I have to switch it off every time I turn the car back on. I know the tune already takes care of most of the VSA, but whatever the button disables should be able to be toggled until told to turn back on.
Ability to have the car start with the VSA button already disabled. I know the Type Rs have this ability but I cannot find anywhere in the manual that allows the lesser models to do the same. I have to switch it off every time I turn the car back on. I know the tune already takes care of most of the VSA, but whatever the button disables should be able to be toggled until told to turn back on.
Re: FlashPro Requests
also,
maybe some options to the aggressiveness of diabled rev hang? Right now you can either turn it on or off. when rev hang is disabled, releasing the throttle can be pretty surgey. Maybe an option for somewhere in the middle of disabled and enabled? Like a "softer" rev hang that's still less than stock, but not as abrupt as completely disabled?
maybe some options to the aggressiveness of diabled rev hang? Right now you can either turn it on or off. when rev hang is disabled, releasing the throttle can be pretty surgey. Maybe an option for somewhere in the middle of disabled and enabled? Like a "softer" rev hang that's still less than stock, but not as abrupt as completely disabled?
Re: FlashPro Requests
and the ability to compare 2 or more datalogs at once would be nice too.
For example, when looking at fuel trims you should be able to pull up 2 datalogs and XY graphs and compare them to see what really needs and adjustment, and what was just an outlier causing a blip.
If we see the same pattern across multiple datalogs, we know its something that needs adjusting.
Right now I have to print out the graphs separately to do comparisons and manually see which patterns line up.
For example, when looking at fuel trims you should be able to pull up 2 datalogs and XY graphs and compare them to see what really needs and adjustment, and what was just an outlier causing a blip.
If we see the same pattern across multiple datalogs, we know its something that needs adjusting.
Right now I have to print out the graphs separately to do comparisons and manually see which patterns line up.
Re: FlashPro Requests
fk8 type r pop/bangs burble on deceleration. Just for funsies
Re: FlashPro Requests
Auto AFM tune for 1.5T non SI (CVT here)