FlashPro Requests

FlashPro Manager software
Gernby
Posts: 308
Joined: Thu Oct 29, 2009 2:53 pm

Re: FlashPro Requests

Post by Gernby »

Could you do one of the following?
1) Allow separate FlashPro datalogs to be merged
2) Allow FlashPro Manager to consider multiple datalogs for lambda / sensor overlays
3) Allow the user to select portions of a datalog to either ignore or remove (for the purpose of lambda / sensor overlays)
'06 NFR S2000

Gernby
Posts: 308
Joined: Thu Oct 29, 2009 2:53 pm

Re: FlashPro Requests

Post by Gernby »

Could you add Fuel Status as a filter option for lambda overlay? Better yet, could you add that filter option to the tables window itself, so that the user can quickly toggle back and forth between open and closed loop?
'06 NFR S2000

DKDO
Posts: 7
Joined: Wed Feb 05, 2014 6:33 am

Re: FlashPro Requests

Post by DKDO »

I'm running TSX with second oxygen sensor disabled and wondering, is it possible to use its ECU input pins for 3rd party sensors (oil pressure\temp etc) to see it on display and make logs, like we're doing with eld - wideband input?

Gearhead98
Posts: 9
Joined: Fri Jan 22, 2016 3:06 pm

Re: FlashPro Requests

Post by Gearhead98 »

Injector Sizing for fuel economy on the RDX.

lorem
Posts: 18
Joined: Sat Mar 05, 2016 11:52 pm

Re: FlashPro Requests

Post by lorem »

Ability to rotate 3D graphing of tuning tables. Currently it's fixed orientation and sometimes that's not the best angle to look.

KillerKrossover
Posts: 1
Joined: Thu Mar 17, 2016 4:03 pm

Re: FlashPro Requests

Post by KillerKrossover »

Please add fuel injection timing/end angle table.

Having tune other cars, this is a powerful tuning parameter. Low end to mid range power, fuel economy, engine starting, fuel smell, all can benefit from injection timing. The bigger the injectors, the more you can benefit from playing around with the injection timing. So please, please.

msangelfox
Posts: 1
Joined: Sat Mar 26, 2016 10:42 pm

Re: FlashPro Requests

Post by msangelfox »

2014 civic si RBC manifold swap, skunk2 CAI, p2r throttle body spacer looking for something safe until I can afford the tune itself

ceauguch
Posts: 2
Joined: Thu Apr 07, 2016 12:22 pm

Re: FlashPro Requests

Post by ceauguch »

Could you add this ECU number 37820-RX0-K21 ?
I can't use Hondata for my Civic si 2014.

Regards
César

civicRSA
Posts: 132
Joined: Thu Nov 12, 2009 11:29 am
Location: South Africa
Contact:

Re: FlashPro Requests

Post by civicRSA »

[2006-2011 Civic Si] Added launch ignition retard and fuel enrichment

Can you please add this for the 2007-2011 FN2 Civic Type-R ?

Gernby
Posts: 308
Joined: Thu Oct 29, 2009 2:53 pm

Re: FlashPro Requests

Post by Gernby »

Could you add the datalog timestamp value to the DDE sensors list in FlashPro Manager?
'06 NFR S2000

typer86
Posts: 328
Joined: Sun Oct 28, 2012 3:17 pm

Re: FlashPro Requests

Post by typer86 »

Make it possible to upload 2 or 3 cals to the ecu to make different driving profiles.
Controlling/selecting over the cruise control panel.

deibral
Posts: 8
Joined: Thu Jun 16, 2016 9:51 am

Re: FlashPro Requests

Post by deibral »

Can you please add fields for REV LIGHTS settings change? Two fields that set start rpm and end rpm where yellow/orrange rev lights start to appear one by one would be great.

dinoc
Posts: 114
Joined: Wed May 16, 2007 4:35 am

Re: FlashPro Requests

Post by dinoc »

Can you add the following 2 sensors please?
- IDLE LEARN - status
- FAN Switch - ON/OFF

Could be useful for doing Idle Relearn by yourself (knowing when the FANS engage and if IDLE RELEARN is Complete).
Euro Honda Accord CL9

Honda
Posts: 30
Joined: Sat May 17, 2014 9:59 am

Re: FlashPro Requests

Post by Honda »

Option to disable the knock control logic, like the kpro.

RadoSalt
Posts: 1
Joined: Mon Aug 01, 2016 5:41 pm

Re: FlashPro Requests

Post by RadoSalt »

Is it possible to add the rolling antilag function or just use the existing lauchcontrol antilag as rolling ALS?

Post Reply