FlashPro Manager Feature Requests:
1.) Clear lambda overlay feature, like in sManager (control+L).
2.) Ability to overlay lambda without recording.
2.) Show target lambda overlay values as a table (like sManager). How about an entire table of target lambda instead of low/med/high?
3.) Unified backup menu, or .ini file, or both (i.e. one .ini file versus four - Graph, Settings, Displays, Sensors)
4.) Boost Control Quick Spool unit adjustment (currently only bar, suggest unit to change with boost control activation pressure dropdown above it)
5.) Change default boost control frequency to 25% (much more usable range of duty, will reduce future forum threads/questions)
6.) *Minor - Update help file regarding wideband input not needing resistor anymore (if you feel that is accurate now).
7.) Boost control solenoid dead time table (see page 63 for example: http://www.mpsracing.com/instructions/h ... struct.pdf)
Many thanks,
Mike
FlashPro Manager feature request thread
FlashPro Manager feature request thread
Last edited by jun1or on Thu Oct 10, 2013 10:34 am, edited 2 times in total.
Re: FlashPro Manager feature request thread
(edited post #1)
Last edited by jun1or on Thu Oct 10, 2013 10:34 am, edited 1 time in total.
Re: FlashPro Manager feature request thread
Added #7 to post #1
Others feel free to chime in and I will add it to post #1.
Others feel free to chime in and I will add it to post #1.
Re: FlashPro Manager feature request thread
Bump,
After further review and years of use and abuse, the following features would be wonderful, if feasible.
A.) Show target lambda overlay values as a table (like sManager). How about an entire table of target lambda instead of low/med/high?
B.) Boost Control Quick Spool unit adjustment (currently only bar, suggest unit to change with boost control activation pressure dropdown above it)
After further review and years of use and abuse, the following features would be wonderful, if feasible.
A.) Show target lambda overlay values as a table (like sManager). How about an entire table of target lambda instead of low/med/high?
B.) Boost Control Quick Spool unit adjustment (currently only bar, suggest unit to change with boost control activation pressure dropdown above it)