Hi hondata,
sorry for the many doubths but I think I am the only one tuning with maf (FN2 euro civic) and so only hondata can aswer this.
I notice that if I use a AFM cal and I set 50º cam angle (Hi cam) the max that the car goes is 47º and never goes to the 50º that I put in the hi cam table.
Don't know if this is a problem or it's normal, but with a MAP cal the car goes to 50º.
And one more questiom. I notice that the AFM force induction start calibration for the FN2 have the cam breack points are set at 0-15-30-40-50 (and not the 0-10-20-30-40 in the reflash). Can I copy all my setings in the my actual cal to this force induction start calibration and use it in my NA car? I was thinking of this to use this cam anglles breack points.
thanks in advance
no 50º cam angle with AFM calibration
FlashPro Manager software
Jump to
- General
- ↳ Hondata News
- ↳ Applications
- ↳ Non-Hondata
- s100/s200/s300
- ↳ s300 / SManager
- ↳ S300 Calibrations
- ↳ SManager Display Templates
- ↳ s100/s200
- ↳ Romeditor 4 Software
- ↳ HondaLogger Software
- ↳ Coil Pack Retrofit
- K-Series
- ↳ K-Pro / KManager
- ↳ K-Pro Calibrations
- ↳ KManager Display Templates
- ↳ K-Series Reflash
- FlashPro
- ↳ FlashPro Manager
- ↳ FlashPro Calibrations
- ↳ Accord 2008+ FlashPro
- ↳ Civic Si 2006-2011 Americas
- ↳ Civic Si 2012-2015 US/Canadian / 2013+ ILX
- ↳ Civic Type R 2006-2010 Japanese FD2
- ↳ Civic Type R 2007-2011 European FN2
- ↳ Civic Type R 2015+
- ↳ Civic 2016+ 1.5 Turbo Americas/Asia
- ↳ CRV 2017+
- ↳ CR-Z 2010-2012 US/Europe/Asia
- ↳ Fit 2007-2008
- ↳ RDX 2007-2012
- ↳ S2000 2006-2009 Americas/Europe/Asia
- ↳ TL 2007-2008
- ↳ TSX 2004-2014
- Traction Control
- ↳ General / Traction Control Manager Software
- ↳ Traction Control with S300
- ↳ Traction Control with KPro
- ↳ Traction Control with FlashPro
- Bluetooth Mobile Apps
- ↳ Hondata Mobile