FlashPro Manager software
soxfan143
Posts: 216 Joined: Mon Nov 12, 2007 5:09 pm
Location: lynnfield MA
Post
by soxfan143 » Sat Oct 17, 2009 11:16 pm
Hello Hondata. I was wondering if you are planning to implement these features into the FlashPro. I'm getting some lean misfires at idle and I need to richen it up a bit. I don't want to run in open loop so this feature would be great. Also would you also be able to add fuel compensation by gear? Thanks guys.
soxfan143
Posts: 216 Joined: Mon Nov 12, 2007 5:09 pm
Location: lynnfield MA
Post
by soxfan143 » Fri Oct 23, 2009 7:18 pm
Anyone?
thesilverbullet
Posts: 129 Joined: Wed Dec 17, 2003 3:11 pm
Location: SC
Post
by thesilverbullet » Fri Oct 23, 2009 7:29 pm
you could force an open loop condition at idle via the closed loop settings and add fuel to the base map - not pretty but worth a shot
'23 RDX SH-AWD
'07 S2K w/ JVT header, Berk 3" header back w/ TP Exhaust, AEM V3 CAI & Flashpro
'02 RSX-S w/cai/exhaust/dcrh/kpro - SOLD
thesilverbullet
Posts: 129 Joined: Wed Dec 17, 2003 3:11 pm
Location: SC
Post
by thesilverbullet » Fri Oct 23, 2009 7:34 pm
btw - with kpro there's a feature that let you set the idle lambda (a/f) straight up - would be a nice add for flashpro...
'23 RDX SH-AWD
'07 S2K w/ JVT header, Berk 3" header back w/ TP Exhaust, AEM V3 CAI & Flashpro
'02 RSX-S w/cai/exhaust/dcrh/kpro - SOLD
soxfan143
Posts: 216 Joined: Mon Nov 12, 2007 5:09 pm
Location: lynnfield MA
Post
by soxfan143 » Fri Oct 23, 2009 7:36 pm
Yea but then I will lose my closed loop cruising. I don't want to have to tune every cell. lol.
2rotormotor
Posts: 13 Joined: Fri Nov 14, 2008 1:42 am
Post
by 2rotormotor » Sun Oct 25, 2009 11:24 am
Fuel compesation by gear would be great. I just did a full tune yesterday and as I went through the gears it got richer and richer.
soxfan143
Posts: 216 Joined: Mon Nov 12, 2007 5:09 pm
Location: lynnfield MA
Post
by soxfan143 » Sun Oct 25, 2009 5:30 pm
thesilverbullet wrote: btw - with kpro there's a feature that let you set the idle lambda (a/f) straight up - would be a nice add for flashpro...
I know, that is why I asked about this.
soxfan143
Posts: 216 Joined: Mon Nov 12, 2007 5:09 pm
Location: lynnfield MA
Post
by soxfan143 » Sun Oct 25, 2009 5:32 pm
2rotormotor wrote: Fuel compesation by gear would be great. I just did a full tune yesterday and as I went through the gears it got richer and richer.
Same here bro. In 3rd gear my AFRs are perfect 12.0-12.2 and the higher the gear the richer it gets. If I go WOT in 5th or 6th I'm in the high 10s low 11s. 4th isn't as bad I'll be about 11.5-11.8.
But a fuel % compensation by gear would be sweet.
soxfan143
Posts: 216 Joined: Mon Nov 12, 2007 5:09 pm
Location: lynnfield MA
Post
by soxfan143 » Sun Nov 29, 2009 11:37 pm
Any possibility of this happening Hondata?
Hondata
Site Admin
Posts: 10452 Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:
Post
by Hondata » Mon Nov 30, 2009 8:23 am
It is on our request list.
Hondata
soxfan143
Posts: 216 Joined: Mon Nov 12, 2007 5:09 pm
Location: lynnfield MA
Post
by soxfan143 » Wed Dec 02, 2009 7:07 pm
Hondata wrote: It is on our request list.
Awesome!! Thanks Hondata.