need help k count hight
-
- Posts: 35
- Joined: Wed May 27, 2020 4:03 pm
need help k count hight
Hello, how are you? I have a problem that I do not know if it is real or ghost I have 20 kcount I need help how to adjust I send you a log
- Attachments
-
- datalog00182852020.fpdl
- (150.15 KiB) Downloaded 188 times
Re: need help k count hight
I would suggest trying to reduce the timing in that area and see if the knock level goes down.
-
- Posts: 35
- Joined: Wed May 27, 2020 4:03 pm
Re: need help k count hight
how do you do in that section since I just bought hondata and the first thing I have done is a log
Re: need help k count hight
Open the calibration you’re driving on In Flashpro manager, then open the datalog. Locate where in the tables it’s knocking based on the knock events in the datalog. Then remove a couple degrees where it’s knocking and smooth out the ignition around it.
If you want some help with it, post the calibration file you currently have in the ecu and I can look it over for you.
If you want some help with it, post the calibration file you currently have in the ecu and I can look it over for you.
-
- Posts: 35
- Joined: Wed May 27, 2020 4:03 pm
Re: need help k count hight
Hello im from spain need please with this datalog and the 4 cilinder
- Attachments
-
- FN2 mapa modificado gasolina corregido (1).fpcal
- This is the map
- (20 KiB) Downloaded 184 times
-
- datalog0020 mapa correccion gasofa maravilla 2.fpdl
- This is the datalog
- (174.59 KiB) Downloaded 191 times
Re: need help k count hight
All of your knock is in one area of the tune so that is good. Give this next revisions a test and we'll see how it looks.
By the way, there are other areas of the tune you should address. You are lean under WOT conditions, partly because the vehicle isn't entering open loop operation under WOT conditions.
What modifications do you have done to the car, you are also maxing the injectors to 100% duty cycle.
By the way, there are other areas of the tune you should address. You are lean under WOT conditions, partly because the vehicle isn't entering open loop operation under WOT conditions.
What modifications do you have done to the car, you are also maxing the injectors to 100% duty cycle.
-
- Posts: 35
- Joined: Wed May 27, 2020 4:03 pm
Re: need help k count hight
it only has invidia g300 exhaust and k & n replacement filter I test the map you have sent me to see if it works well
Re: need help k count hight
We may need to get you on a new calibration then. There is no reason to max out the injectors with such few mods. But we’ll see how the knock looks. Let me know how it looks.
-
- Posts: 35
- Joined: Wed May 27, 2020 4:03 pm
Re: need help k count hight
This is the new datalog with new calibración
- Attachments
-
- datalog0021 version 2 ajuste hondata.fpdl
- (147.87 KiB) Downloaded 169 times
Re: need help k count hight
Better, I took a little bigger swing at it this time to remove it. If it's gone on this one, we can start to add some back in.
-
- Posts: 35
- Joined: Wed May 27, 2020 4:03 pm
Re: need help k count hight
ok thank you very much for the help provided, would it be convenient to start from 0 with an origin map?
or this map would be worth adjusting the calibration
or this map would be worth adjusting the calibration
-
- Posts: 35
- Joined: Wed May 27, 2020 4:03 pm
Re: need help k count hight
This is the datalog v3
- Attachments
-
- datalog0022 version 3 hondata.fpdl
- (176.67 KiB) Downloaded 186 times
Re: need help k count hight
It looks like it's not getting any better, I pulled a lot of timing out of it and it is still knocking. Could be partially how lean it is. But also could be something mechanical as well. With the knock being in only one cylinder, it could be a false knock or something mechanical like sparks plugs or valve adjustment.jonatan riaño wrote: ↑Tue Jun 09, 2020 10:49 pm ok thank you very much for the help provided, would it be convenient to start from 0 with an origin map?
or this map would be worth adjusting the calibration
I would definitely recommend starting you on an FN2 file that I have. Then we can reinspect everything. But it's up to you.
-
- Posts: 35
- Joined: Wed May 27, 2020 4:03 pm
Re: need help k count hight
ok, if you can send me your file and i test if it continues like this, then it must be noise the spark plugs are new they will have 6000km
-
- Posts: 35
- Joined: Wed May 27, 2020 4:03 pm
Re: need help k count hight
I got this error p0325