Hello,
Recenty i swap my crx with k20z4 install Kpro v2 and need a base map to tune a car. Car run's great but vtec dont open. Now i'm running k20a2 base map
K20Z4 Base Map
-
- Posts: 1
- Joined: Wed Dec 04, 2019 7:10 am
Re: K20Z4 Base Map
Not sure if I'm allowed to share a map but this is a basic Fn2 (k20z4)map the only mod is a gruppe m induction change.It was done by a really good uk based tuner and tested on a notoriously tight Dyno and made 195hp and the car drives lovely in the middle gears loads of 3rd and 4th gear pull between 45 and 85 mph B Road driving is a real laugh.
Hope it helps.
Hope it helps.
- Attachments
-
- FN2romaine.fpcal
- Fn2 romaine
- (19.06 KiB) Downloaded 291 times
Re: K20Z4 Base Map
Iam not sure if kpro working with the RSP based ECU.
If you are using the K20a ECU check the wires and sensors, groundings etc.
Br
If you are using the K20a ECU check the wires and sensors, groundings etc.
Br