Help - FN2(2007) with CPL Racing CAI

FlashPro questions & answers specific to the FN2 European Civic Type R
Post Reply
majic
Posts: 2
Joined: Mon Mar 18, 2019 7:09 am

Help - FN2(2007) with CPL Racing CAI

Post by majic » Mon Mar 18, 2019 7:28 am

Hello,

I am new here and this is my first post. My knowledge are low(also my English) so please don't troll :)

I have a Civic FN2(2007) with CPL Racing Civic Type R FN2 Cold Air Intake and I don't know how to tune this correctly on my car. Also I am not able to find a good tuner(FlashPro) in my country/region.

I adjusted the AFM Flow via "Active fuel tuning" and the car runs well... but I am sure this is not enough.

Is anyone here able to help me with this issue(cost included)?

Thank you in advance.

User avatar
Spunkster
Site Admin
Posts: 18022
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Help - FN2(2007) with CPL Racing CAI

Post by Spunkster » Mon Mar 18, 2019 10:19 am

Have you contact CPL Racing for assistance with this?

majic
Posts: 2
Joined: Mon Mar 18, 2019 7:09 am

Re: Help - FN2(2007) with CPL Racing CAI

Post by majic » Tue Mar 19, 2019 7:49 am

Spunkster wrote:
Mon Mar 18, 2019 10:19 am
Have you contact CPL Racing for assistance with this?
Yes... They recommend me to tune the car on the dyno...
All the dyno in my region use different solutions and some of them only can install(no tune) the standard groupN map with FlashPro...

curtusz
Posts: 201
Joined: Sat Jun 01, 2013 10:14 am
Location: Wakefield/Leeds uk

Re: Help - FN2(2007) with CPL Racing CAI

Post by curtusz » Thu Mar 21, 2019 11:49 am

I use target lambda tables on group n basemap. Haven't had time to tune but fuel is always where it needs to be . Have active tuning enabled also. Strims are not too bad aswell

Post Reply