abs, vsa, eps, srs, all sorts of warning lights

FlashPro questions & answers specific to the FN2 European Civic Type R
Post Reply
charlie!l
Posts: 6
Joined: Tue May 04, 2010 5:39 am

abs, vsa, eps, srs, all sorts of warning lights

Post by charlie!l »

I am getting all sorts of warning lights on my FN2 dash and want to turn them all off.

I have a K20z in a lotus elise and it all seems to run fine. I installed the engine management related bits of the loom, ecu, engine fusebox, internal fusebox and dash but just cut out all the other unrelated components and wiring.

Of course, the dash is now in panic mode because it thinks that there is a fault with multiple systems in the car but I dont need to be told that there is a problem with the VSA, EPS, etc - I know this because I didnt bother putting them into the car.

Does anyone have any idea how to tell the dash that its all OK and i dont need these warnings?
nunoctr
Posts: 170
Joined: Tue May 16, 2006 12:29 pm

Post by nunoctr »

open the dash and take that lights out, you don't need them.
charlie!l
Posts: 6
Joined: Tue May 04, 2010 5:39 am

Post by charlie!l »

Yeah I thought about that (and that may be the best I can get) but I was hoping that there was a way to still see the odometer and consumption in the centre of the tach (this is hidden when the warnings appear there too!
Post Reply