Page 1 of 1

Question on MAP WOT determination pressure

Posted: Thu Apr 07, 2011 7:42 pm
by ModFreak
Hi, I have noticed from my datalog that the MAP WOT determination pressure don't seemed to work.

Is there other consideration by the ECU to switch to "OPEN" when on partial throttle?

e.g. I've set my MAP WOT pressure to say 0.81 bar at 3000rpm. When I open my throttle say 60% suddenly, it reaches 0.85 bar at 3500 rpm but it doesn't go into "OPEN" in my fuel statues.

My ride is a JDM FD2R.

Thanks.