would this be advisable ?
see knock in cyl 2 and 3
in an all motor passs in 3rd gear 7300 rpm knock count in cyl 2 is 4 and a/f was in 12:9 to 13:4
in an nitrous pass 3rd gear 7300 knock count in cyl 2 is 10 and a/f is 12:5
nitrous pass 7200 rpm knock count cyl 2 is 14 and cyl 3 is 2 a/f at 12:2 how much knock is BADDDD and how can i fix this without a tuner
I was talking with someone about this earlier today but I hope I can get some more info
i spray 65 wet shot from 4500 -7500rpms with 1 step colder plugs without flashpro
now that I have a race Calibration ( base map included with flashpro) should I worry about runing my 65 shot
should I datalog a 3rd gear wot nitrous pull maybe someone could review it for me and see what they think ?
How would I go about emailing someone my datalog?Or posting it on here
and i cant get falshpro software to work for the LIFE OF ME on my girlfriends labtop can someone please help me the install process worked flawlessly on my home computer but wont work on the labtop thanks guys.
i was hoping of runing a wet 65 shot this weekend at the track but do not want to risk the motor obviously i was runing nitrous just fine before flash pro map injen cai race header exhaust base map
just a few combined questions from another site i tryed asking couldnt get much help though thanks alot for the help in advance
Flashpro with nitrous
-
- Posts: 5
- Joined: Fri May 08, 2009 3:57 pm
-
- Posts: 5
- Joined: Fri May 08, 2009 3:57 pm
so i just did a few changes on my FP i disabled secondary o2 sensor
i have 1.1.07 beta software
and i have __FG2/FA5, MAP based, Injen CAI, race header, highflow cat, stock catback___
i just did a 3rd gear 65 wet shot datalog these are some results
i blew my motor haha juss kidding
nitrous engages at 4500 t0 7500
3700 rpm / 14.2 AFR
4000 rpm / 14.2 AFR
4700 rpm / 12.03 AFR
5000 rpm / 11.80 AFR
5500 rpm / 12.10 AFR
6000 rpm / 12.40 AFR
6500 rpm / 12.3 AFR
7000 rpm / 12.5 afr
7500 rpm / 12.4 afr
7800 rpm / 12.7 afr
AND NO KNOCKKKKK sheeeeesh i really wanna upload it here for help
i have 1.1.07 beta software
and i have __FG2/FA5, MAP based, Injen CAI, race header, highflow cat, stock catback___
i just did a 3rd gear 65 wet shot datalog these are some results
i blew my motor haha juss kidding
nitrous engages at 4500 t0 7500
3700 rpm / 14.2 AFR
4000 rpm / 14.2 AFR
4700 rpm / 12.03 AFR
5000 rpm / 11.80 AFR
5500 rpm / 12.10 AFR
6000 rpm / 12.40 AFR
6500 rpm / 12.3 AFR
7000 rpm / 12.5 afr
7500 rpm / 12.4 afr
7800 rpm / 12.7 afr
AND NO KNOCKKKKK sheeeeesh i really wanna upload it here for help