Page 1 of 1

Error Message

Posted: Sat Aug 08, 2009 4:45 am
by silverspoon1996
It keeps giving me an error message when I try to upload a map. It asks me to make sure the most current version is installed. I am running version 1.1.08 BETA. Whats wrong?

Posted: Mon Aug 10, 2009 10:39 am
by Spunkster
Click on Help, and then send informtaion to Hondata. Do this only once and only when instructed by tech support.

Posted: Sun Aug 16, 2009 11:26 am
by silverspoon1996
The upload went, I still sent the information because a new error message came up stating: "This flashpro cannot disable the immobilizer"

Posted: Sun Aug 16, 2009 3:16 pm
by silverspoon1996
Now my car wont start. It came up with the original message while trying to datalog. I sent the information to support.. HELP PLEASE!

Posted: Mon Aug 17, 2009 4:15 am
by silverspoon1996
also I noticed the note on my calibration changed to "DEMENSTRATION CALIBRATION"

It ususally saids "410cc injector start up map"

Posted: Mon Aug 17, 2009 11:27 am
by Spunkster
When you have it in the car and plugged into the laptop and ECU, what at the bottom of the screen has red x's or green checks?

Posted: Mon Aug 17, 2009 2:05 pm
by silverspoon1996
everything had green check marks until i went to datalog and it threw the error message... then all that was green was flashpro. ecu and obd2 were red after that.