version 1.1.0.5 questions

FlashPro questions & answers specific to the 2006-2011 Americas Civic Si
Locked
all-black
Posts: 82
Joined: Mon Jul 06, 2009 1:43 pm
Location: san ramon
Contact:

version 1.1.0.5 questions

Post by all-black » Thu Jul 09, 2009 10:26 am

i was reading the new update

V1.1.0.5 (8 July 2009)

· Added Reflash Rebate information.

· Changed race calibrations to prevent long term fuel trim changing.

· Fixed cruise control for Euro CTR AFM calibrations.

· Added VTEC crossover tuning

but when i looked at the maps under race calibrations and try and see if there is a revision to the maps they still say version 1.00

so what changed and how will we know

User avatar
Spunkster
Site Admin
Posts: 18022
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Thu Jul 09, 2009 10:58 am

nothign will change in the calibration list, but there are things which are changed in the calibration itself. You just need to either upload the saved calibration you have using the new version of software to apply the updates or use one of the base calibrations.
Last edited by Spunkster on Thu Jul 09, 2009 12:23 pm, edited 1 time in total.

all-black
Posts: 82
Joined: Mon Jul 06, 2009 1:43 pm
Location: san ramon
Contact:

Post by all-black » Thu Jul 09, 2009 11:53 am

thats what i was asking, was that the calibrations would have changes in them but under there titles when you load them up to modify or load onto the fp the version says the same as before so thats why im asking. so how would you know which map is the old one verse the new one? are the changes in the software or in the calibration? you said, "You just need to either upload the saved claibration you have using the new version of software to apply the updates or use one of the base calibrations" im just trying to get some clarification thank you guys.

User avatar
Spunkster
Site Admin
Posts: 18022
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Thu Jul 09, 2009 12:24 pm

Simply by using the new software to upload the calibration, it has all updates applied to it.

ImAuthenticFTW
Posts: 78
Joined: Fri May 08, 2009 12:59 pm

Post by ImAuthenticFTW » Thu Jul 09, 2009 1:36 pm

All my calibrations have verson 1.01 listed in them.....

User avatar
Spunkster
Site Admin
Posts: 18022
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Thu Jul 09, 2009 3:29 pm

That will not be updated

ImAuthenticFTW
Posts: 78
Joined: Fri May 08, 2009 12:59 pm

Post by ImAuthenticFTW » Thu Jul 09, 2009 6:51 pm

Just curious, but i use the MSD DashHawk which reads my AFR off the factory wideband (i know its not 100% accurate) ever since ive loaded another map with the update for the AFR correction i seem to be showing leaner (yet still safe ~13.3-13.9:1) did that update effect the way a scanner will read or should it still read the off numbers?

User avatar
Spunkster
Site Admin
Posts: 18022
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Fri Jul 10, 2009 9:26 am

Use your laptop to datalog.

Locked