My engine light came on. Did a datalog and nothing shows in the "Error Code" box.
I've only used this feature sparingly over the years and maybe I'm not doing it right?
My car is KW supercharged.
Anyone has any experience with this?
CEL on no error code
Re: CEL on no error code
Did you record the datalog on the FlashPro and transfer it to a laptop, or record directly to a laptop?
Hondata
Re: CEL on no error code
The error code is only displayed, if you press the play button in the graph window!
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Re: CEL on no error code
Noooo, not again. "Knock Sensor 1 Circuit malfunction". IIRC this is the knock sensor itself.
It happened once before, when someone installed the wrong knock sensor.
I've had some work done to the car, including clutch and tranny and I know the sensor is in the way. Maybe got damaged?
The car is freshly tuned wonder how bad can it be to drive it around like this...
Thanks for the advice, completely forgot how to make it show the error.
Re: CEL on no error code
Finally got around to change the knock sensor. CEL came on again in about two miles. Dataloged and now really can't pull the code. It does show on the older logs but not the latest one.
Anyone can advice?
Thank you.
Anyone can advice?
Thank you.
Re: CEL on no error code
Can you post the datalogs when you have this error?
Re: CEL on no error code
Sure. As soon as I find out how to post it. Only have one log.
Re: CEL on no error code
Let's give it a try.