stock vs injen cai maf cal. question

FlashPro questions & answers specific to the 2006-2011 Americas Civic Si
Locked
kristribble
Posts: 8
Joined: Thu Aug 27, 2009 9:15 pm

stock vs injen cai maf cal. question

Post by kristribble »

I currently have stock fa5 and I am considering the injen cai. I noticed that in your maf cam table for stock it retains 45 degree cam on all manifold pressure and rpms below about 6000 on high cam. Injens cai maf calibration pulls the cam back with higher manifold vacuum and only advances to 45 at or near wot. Also with maf calibrarions for stock and injen the cam is never advances past 40. Just curious why. I am sure there is some rules agianst Hondata suggesting bolt on parts but I will ask anyway. Is there an intake that you guys like more than the others? I have enjoyed the flashpro on my stock civic and would recommend it as the first mod anyone should do.
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

This is what we found made the best power on the dyno.
Locked