Mexican Civic SI with US swapped ECU
Please contact me for details. I have solutions to all of your problemsk24FD2R wrote:hello, i am from asia.
i bought a complete SI head with a k24 block and an SI ecu for my FD2.
i also bought a flashpro to tune it of course
the engine was put perfectly
PROBLEM
i swapped the ecu of my car with the SI ECU
the car did not work because of the immobilizer. as said by the people from 8th gen., i should bring the ECU to the dealer to have it reprogrammed.
went there but they cant reprogram it because it came from the US.they only have the local program
any solutions to bypass or disable the immobilizer so i can use the SI box and tune with flashpro?
as of right now,i am using my stock box. which came from the 155HP asian version which i think i read that flashpro was available already. if it is, will the US version of the flashpro work with it?
really need some tuning badly.
thanks a lot !
:D
Thanks
i replied already!thanks!hope to hear from you soon!yungming wrote:Please contact me for details. I have solutions to all of your problemsk24FD2R wrote:hello, i am from asia.
i bought a complete SI head with a k24 block and an SI ecu for my FD2.
i also bought a flashpro to tune it of course
the engine was put perfectly
PROBLEM
i swapped the ecu of my car with the SI ECU
the car did not work because of the immobilizer. as said by the people from 8th gen., i should bring the ECU to the dealer to have it reprogrammed.
went there but they cant reprogram it because it came from the US.they only have the local program
any solutions to bypass or disable the immobilizer so i can use the SI box and tune with flashpro?
as of right now,i am using my stock box. which came from the 155HP asian version which i think i read that flashpro was available already. if it is, will the US version of the flashpro work with it?
really need some tuning badly.
thanks a lot !
:D
Thanks
Replied to you.k24FD2R wrote:i replied already!thanks!hope to hear from you soon!yungming wrote:Please contact me for details. I have solutions to all of your problemsk24FD2R wrote:hello, i am from asia.
i bought a complete SI head with a k24 block and an SI ecu for my FD2.
i also bought a flashpro to tune it of course
the engine was put perfectly
PROBLEM
i swapped the ecu of my car with the SI ECU
the car did not work because of the immobilizer. as said by the people from 8th gen., i should bring the ECU to the dealer to have it reprogrammed.
went there but they cant reprogram it because it came from the US.they only have the local program
any solutions to bypass or disable the immobilizer so i can use the SI box and tune with flashpro?
as of right now,i am using my stock box. which came from the 155HP asian version which i think i read that flashpro was available already. if it is, will the US version of the flashpro work with it?
really need some tuning badly.
thanks a lot !
:D
Thanks
Thanks
I am having a similar issue with a customers car. its a FD2 rce car purchased from HPD... we have only today to tune the car for a double header @ Mosport (world challenge) race this weekend.
we only have the usdm flash-pro & the car is set up with push-button start & no key. we tried changing the calibration & now the car won't start & the immobilizer light flashes (it didn't before) & we don't hear the fuel pumps prime. we tried reverting back to stock & it still won't start
can someone help us today!!!! please call our shop 518-261-1790 If it matters we are a authorized Hondata dealer (Synapse Motorsport)
we only have the usdm flash-pro & the car is set up with push-button start & no key. we tried changing the calibration & now the car won't start & the immobilizer light flashes (it didn't before) & we don't hear the fuel pumps prime. we tried reverting back to stock & it still won't start
can someone help us today!!!! please call our shop 518-261-1790 If it matters we are a authorized Hondata dealer (Synapse Motorsport)
-
- Posts: 248
- Joined: Wed May 17, 2006 9:49 am