Safe A/F ratios for MAP calibrations?

FlashPro questions & answers specific to the 2006-2011 Americas Civic Si
Locked
k20z3kid
Posts: 17
Joined: Sun Jul 19, 2009 2:12 pm

Safe A/F ratios for MAP calibrations?

Post by k20z3kid »

Hey guys. I have been trying to find an answer by browsing around different forums but I have been unsuccessful so far.

I have an 06 Civic Si with a AEM V2 cold air intake. I recently switched to the MAP calibration for this intake. I am unsure of what is a safe AF ratio. With regular driving I am roaming around 14.7 ish and I know that is fine. But I datalogged a 3rd gear pull up to redline at WOT and from 5500rpm to 8200rpm my AF ratio fluctuates from 12.5 - 13.3ish. Is this safe? Or am I causing damage? Thanks Hondata!
ImAuthenticFTW
Posts: 78
Joined: Fri May 08, 2009 12:59 pm

Post by ImAuthenticFTW »

nah, thats perfectly fine man, no problems at all
k20z3kid
Posts: 17
Joined: Sun Jul 19, 2009 2:12 pm

Post by k20z3kid »

Awesome. Well that is good to know. What would be the safe area for AF ratios? How low and how high can the AF go without doing damage? I am guessing there is no really a straightforward answer to such. lol.
dellas
Posts: 8
Joined: Thu Jul 09, 2009 2:45 pm

Re: Safe AFRs

Post by dellas »

At WOT you would want it between 12.8 - 13.2 with it tapering off to 12.8 in the upper RPMs for added safety.

At part throttle between 14.5 - 15.0, those AFRs would be for columns 1-7.
Locked