*Need a basemap Hybrid CAI invidia q300 only ****

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
FD2Ant
Posts: 4
Joined: Sun Jul 18, 2021 5:13 pm

*Need a basemap Hybrid CAI invidia q300 only ****

Post by FD2Ant »

need a basemap for hybrid cai and invidia q300 just so i can drive 15 miles home please and thanks
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: *Need a basemap Hybrid CAI invidia q300 only ****

Post by EFICU »

Are you looking for a Flashpro basemap or a or a KPro? I see you have a thread in both sections...

Also, are we working on an FD2, or what vehicle?
FD2Ant
Posts: 4
Joined: Sun Jul 18, 2021 5:13 pm

Re: *Need a basemap Hybrid CAI invidia q300 only ****

Post by FD2Ant »

i added it into the Kpro section by accident and forgot to delete it. I need a flashpro basemap. this is a 2007 FA5
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: *Need a basemap Hybrid CAI invidia q300 only ****

Post by EFICU »

FD2Ant wrote: Mon Jul 19, 2021 3:45 am i added it into the Kpro section by accident and forgot to delete it. I need a flashpro basemap. this is a 2007 FA5
Okay sounds good. Are you wanting to have some fun with it while you wait for your header, or just something to drive around on? I ask because I can send you a simple a basefile locked on the 0* cam angle which means it's very basic. It drives smooth, but it won't be a lot of fun to drive on power wise. Or I can send you a basefile with a cam angle map so it would be more fun to drive.

Let me know and I will send the according file for you.
FD2Ant
Posts: 4
Joined: Sun Jul 18, 2021 5:13 pm

Re: *Need a basemap Hybrid CAI invidia q300 only ****

Post by FD2Ant »

Im looking to have some fun with the tune for now. i barely drive the car if that makes a difference.
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: *Need a basemap Hybrid CAI invidia q300 only ****

Post by EFICU »

FD2Ant wrote: Tue Jul 20, 2021 1:29 pm Im looking to have some fun with the tune for now. i barely drive the car if that makes a difference.
Okay sounds good. Here is the first one for you. It will probably take a couple revisions to get it dialed for you, then you'll be good to go.

Have you done any datalogging at all with the FlashPro? We need datalogs to be 20-30 minutes in length, and with as much stop and go type driving as possible. On your drive, make one wide open throttle (WOT) pull in third gear from 2500-8600. Only make one WOT pull in this first revision and keep the driving fairly normal, that way I can clean up any big areas before you get spirited with the driving.

Let me know if you have any questions. The lower vtec threshold is set at 4500 in this one. See what you think.
FD2Ant.SD.Rev01 (Blended).fpcal
(22.53 KiB) Downloaded 67 times
FD2Ant
Posts: 4
Joined: Sun Jul 18, 2021 5:13 pm

Re: *Need a basemap Hybrid CAI invidia q300 only ****

Post by FD2Ant »

Hey man i just took a 20-30 min drive and had one wot from 3rd to 4th the rest was cruising and stop and go traffic. I think i saved it correctly but give it a check if not ill go on another drive.

what's your email? so i can send the datalog to you?
Attachments
datalog 72221 7am.fpdl
(1.13 KiB) Downloaded 64 times
datalog 72221 7am.fpdl
(1.13 KiB) Downloaded 58 times
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: *Need a basemap Hybrid CAI invidia q300 only ****

Post by EFICU »

Unfortunately there is no data in these files. I will PM you my email address,
Ryanfd2
Posts: 1
Joined: Thu Jun 16, 2022 11:08 am

Re: *Need a basemap Hybrid CAI invidia q300 only ****

Post by Ryanfd2 »

Hello, I also have the Invidia q300 on my fg2 and I just got my Hybrid racing intake in the mail yesterday & will be installing this weekend. Is there any chance i could use this tune as well? Just looking for something until i get headers later this summer.
Post Reply