8th gen civic si Calibration questions

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
Fg2_Kxiong
Posts: 1
Joined: Mon Jul 29, 2019 3:29 pm

8th gen civic si Calibration questions

Post by Fg2_Kxiong »

So I have a 2008 Civic si
Just recently did Skunk2 cold air, skunk2 alpha header and a full race 3”in exhaust.
I used the calibration from flash pro with the skunk2 header and Catback but seems to not run so smooth after 7500 rpm. Yes yes I know I need a actual tune. Reasons why I’m not yet is because I have skunk2 tuner 2 cams and not installing yet till maybe a few months from now.

I was wondering what other calibration I could run and see if it runs better?

Anyone change some of the settings such as Vtec engagement or rev limits?

Thanks any recommendation is highly appreciated.
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: 8th gen civic si Calibration questions

Post by Spunkster »

You need to determine if this is a fuel or ignition related issue.
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: 8th gen civic si Calibration questions

Post by EFICU »

Fg2_Kxiong wrote: Mon Jul 29, 2019 3:37 pm So I have a 2008 Civic si
Just recently did Skunk2 cold air, skunk2 alpha header and a full race 3”in exhaust.
I used the calibration from flash pro with the skunk2 header and Catback but seems to not run so smooth after 7500 rpm. Yes yes I know I need a actual tune. Reasons why I’m not yet is because I have skunk2 tuner 2 cams and not installing yet till maybe a few months from now.

I was wondering what other calibration I could run and see if it runs better?

Anyone change some of the settings such as Vtec engagement or rev limits?

Thanks any recommendation is highly appreciated.
PM'd you.
Post Reply