Autotuning - Upgraded injectors to 550cc, J35 throttle body with spacer

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
ecronic
Posts: 49
Joined: Tue Jun 14, 2011 2:37 pm

Autotuning - Upgraded injectors to 550cc, J35 throttle body with spacer

Post by ecronic »

Hi All

At the moment I'm running FD2R base map from the flashpro calibration and my car is running fine.

Mod-list:
RBC intake, Injen CAI
Headers, 2.5" straight exhaust
Injectors OEM 310

Upgrades:
550cc grams injectors
J35 tb with k-Tuned spacer

My question is can I use the autotuning feature in Flashpro to fine tune the map on its own or will I still be running rich?

Thanks for your input
Thanks & Regards
------------------------------
Ecronic
ruddyrid
Posts: 11
Joined: Thu Dec 12, 2013 5:14 pm
Location: White Base
Contact:

Re: Autotuning - Upgraded injectors to 550cc, J35 throttle body with spacer

Post by ruddyrid »

Your best bet is to start by adjusting the Injector Size in the calibration. Here's the help page on how this is done:

https://www.hondata.com/help/flashpro/i ... meters.htm

For the throttle body you would adjust the Throttle vs Flow parameters.
/ruddyrid
ecronic
Posts: 49
Joined: Tue Jun 14, 2011 2:37 pm

Re: Autotuning - Upgraded injectors to 550cc, J35 throttle body with spacer

Post by ecronic »

Thanks for the reply. Got it all worked out.
Thanks & Regards
------------------------------
Ecronic
Post Reply